MINKA LAVERY 4670-111 1-Light Medium E-26 Incandescent Pendant Instruction Manual
- June 13, 2024
- MINKA LAVERY
Table of Contents
MINKA LAVERY 4670-111 1-Light Medium E-26 Incandescent Pendant
Product Information
- Product Name: Item#4670-111
- Date of Manufacture: 12/26/2017
Installation Instructions
HANGING THE FIXTURE (Fig. 1)
-
Carefully remove the fixture from the carton and check that all parts are included as shown in the illustration.
-
Shut off power at the circuit breaker and remove the old fixture including the mounting hardware.
-
Determine the desired hanging height and thread rods G, and H to the nipple of the fixture body. Then attach loop L by screwing it into rod G.
-
Attach the quick link to loop L on the canopy E, and feed the wire over loop L and the canopy E carefully.
-
The mounting bracket B contains several pairs of threaded holes. Find the pair of holes that match the hole spacing in your Junction box.
CONNECTING THE WIRES (Fig. 2)
-
Attach the mounting bracket B to the Junction Box K using the two mounting screws (size: 8/32*25mm). Tighten the screws C securely with a screwdriver. The side of the mounting plate marked GND must face out.
-
Connect the electrical wires as shown in Fig. 2. Make sure that all wire connections are secured. If your outlet has a ground wire (green or bare copper), connect the fixture Ground Wire to it.
INSTALL LIGHT BULB (Fig. 1) -
Otherwise, connect the fixture Ground Wire directly to the circular strap using the Green Screw provided. Position the canopy E so that the mounting screws protruding from the mounting bracket line up with the holes in the canopy.
-
Secure the canopy in place with provided mounting screws F.
FINISH THE INSTALLATION (Fig. 1) -
Install a light bulb J (excluded) in accordance with the fixture’s specifications. Do not exceed the maximum wattage rating.
-
Your installation is complete now. Return power to the junction box and test the fixture.
Wire Color Codes
- Fixture Wires Black or Smooth
- Fixture Wires White or Ribbed
- Fixture Wires Bare Copper (Ground)
- House Wires Black (Hot)
- House Wires White (Neutral)
- House Wires Green (Ground)
WARNING!
SHUT POWER OF FAT FUSE OR CIRCU TB R E AK E R . AVERTISSEMENT! COUPER LE
COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig.1
- Set #A-010
- Crossbar
- Ground Screw
- Mounting Screw*2
- Rod# W30-H-1111(G)W30-1-1113(H)