MINKA LAVERY 1440 Rectangle Pivoting Mirror in Polished Chrome Instruction Manual
- June 13, 2024
- MINKA LAVERY
Table of Contents
MINKA LAVERY 1440 Rectangle Pivoting Mirror in Polished Chrome
Product Information
This product is Model 1440, a mirror that comes with adjustable angle feature. It includes decorative knobs and allen screws for easy installation and adjustment.
The package includes:
- 1 mirror
- decorative knob (C)
- allen wrench
- mirror stand offs
Product Usage Instructions
- Carefully unpack the new mirror and lay out all the components.
- Identify the decorative knob (C), allen screw, and mirror stand offs.
- Decide on the desired location for hanging the mirror.
- Using appropriate tools, securely attach the mirror stand offs to the wall at the chosen location. Make sure they are level and properly aligned.
- Gently place the mirror onto the stand offs, ensuring it is securely positioned.
- If you wish to adjust the angle of the mirror, follow these steps:
- Unscrew the decorative knob (C).
- Loosen the allen screw inside of the mirror stand offs using the allen wrench.
- Adjust the angle of the mirror to your preference.
- Tighten the allen screw using the allen wrench.
- Screw back the decorative knob (C) to secure the mirror in place.
- Your installation is now complete. Enjoy using your adjustable angle mirror!
INSTALLATION INSTRUCTIONS
For Model 1440
READ AND SAVE THESE INSTRUCTIONS
HANGING THE MIRROR
- Carefully unpack the new mirror and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation. Fig. 1
- Take out the two arms and unscrew the decorative knob(C), then Install the two arms to the frame with the Allen wrench (included.)(PART#WRH-L-M8).and screw back the decorative knob(C). Fig 2
- Locate a suitable place for the mirror on the wall.
- Unscrew the two set screws (D) and lift up the decorative cover (E) Fig 3.
- Position the decorative cover (E) on the wall and mark the locations for the hollow wall anchors. Pre-drill the holes for the hollow wall anchors and insert them into the wall as Fig. 4.
- Place the mirror on the wall and secure it with the mounting screws (F) Fig 5.
- Note : IF NEEDED, REMOVE THE DECORATIVE KNOB(C) FOR ACCESSING TO THE MOUNTING SCREW AND PUT IT BACK WHEN IS DONE.
- Put back the decorative cover (E) and secure by screwing the two set screws (D) as Fig 6.
- The angle of the mirror is adjustable. Unscrew the decorative knob(C) and loosen the allen screw inside of the mirror stand offs with the allen wrench and adjust the angle you want. Then tighten the allen screw using the allen wrench, and screw back the decorative knob(C). Fig.2
Your installation is now complete
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>