alora WV328611 Wall Lamp Instruction Manual
- June 13, 2024
- aLora
Table of Contents
alora WV328611 Wall Lamp
Product Information
- Product Name: WV328611 Wall Lamp
- Manufacturer: Alora Lighting
- Technical Support: 1.855.855.8926
- Email: technicalsupport@aloralighting.com
- Website: www.aloralighting.com
- Model Number: WV328611
Warnings and Cautions
Before using the wall lamp, please read and understand the following
warnings and cautions:
- Ensure the lamp is securely mounted to avoid accidents or damage.
- Make sure to follow proper electrical connections to prevent electrical hazards.
- Use the recommended lamp with the appropriate wattage and type as indicated on the socket label.
Assembly Instructions
- Remove the wall lamp from its original package.
- Separate the mounting plate (1c) from the canopy (2a) by removing the canopy screw (2b).
- Attach the mounting plate (1c) to the electrical junction box (1a) using the junction box screws provided (1e) in the hardware package.
- Make proper electrical connections by connecting the black wire to hot L, white wire to neutral N, and ground wire to GND using the wire nuts (1b) provided in the hardware package.
- Secure the canopy (2a) to the bottom of the mounting plate (1c) (refer to Illustration 1) and then secure it with the canopy screw (2b) at the top of the mounting plate (1c).
- Install the recommended lamp (not provided) to the fixture socket, following the maximum wattage and type information indicated on the socket label.
You are now ready to enjoy your wall lamp.
Safety Instruction
WARNINGS AND CAUTIONS
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all times during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
Please Note:
- 120V input
NOTICE
- The important safeguards and instructions outlined in this sheet cannot cover all possible conditions and situations that may occur. It must be understood that caution and certain care factors must be followed. These instructions are provided for your safety and we highly recommend that a licensed, trained electrician install this unit.
- This fixture is designed to be mounted on a correctly installed standard round or octagon box OR through a wiring box with a plaster frame. The box must be securely mounted to the structure of the building. The crossbar and hardware supplied should be used, directly mounting the fixture to the outlet box may make it impossible to correctly align the fixture.
Assembly Instruction
-
Step 1
Remove fixture from its original package. -
Step 2
Separate mounting plate (1c) from canopy (2a) by removing canopy screw (2b). -
Step 3
Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in hardware package. -
Step 4
Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in hardware package. -
Step 5
Secure canopy (2a) to bottom of mounting plate (1c) (See Illustration 1), followed by securing with canopy screw (2b) at top of mounting plate (1c). -
Step 6
Install the recommended lamp (4a) (not provided) (referred on the socket label for maximum wattage and type) to fixture socket.
You are now ready to enjoy your fixture.
P: 1.855.855.8926
CANADA : 19054 28th Avenue Surrey – BC V3Z 6M3
USA : 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
www.aloralighting.com
20230619