alora WV332904 Light Wall Lamp Instructions

: June 13, 2024
: aLora

Table of Contents

alora WV332904 Light Wall Lamp
Product Information
WARNINGS AND CAUTIONS
Assembly Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

alora WV332904 Light Wall Lamp

Product Information

Product Name: WV332904 Wall Lamp

Warnings and Cautions

Please read and follow all instructions carefully before installation and usage.
Ensure the electrical power is turned off before starting the installation process.
Only use the recommended lamp type and wattage specified on the socket label.
If you are unsure about any step of the installation process, contact our technical support.

Assembly Instructions

Remove the wall lamp fixture from its original package.
Separate the mounting plate (1c) from the canopy (2a) by removing the canopy screws (2b).
Attach the mounting plate (1c) to the electrical junction box (1a) using the junction box screws provided (1e) in the hardware package.
Make proper electrical connections:
- Connect the black wire to the hot L terminal.
- Connect the white wire to the neutral N terminal.
- Connect the ground wire to the GND terminal.
Use the wire nuts (1b) provided in the hardware package to secure the electrical connections.
Attach the canopy (2a) to the mounting plate (1c) using the canopy screws (2b).
Install the recommended lamp (4a) to the fixture socket. Refer to the socket label for the maximum wattage and type of lamp to use. Note that the lamp is not provided with the wall lamp.

You are now ready to enjoy your WV332904 Wall Lamp.

Technical Support

Phone: 1.855.855.8926
Email: technicalsupport@aloralighting.com
Address (Canada): 19054 28th Avenue Surrey – BC V3Z 6M3
Address (USA): 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
Website: www.aloralighting.com
Date: 20230619

WARNINGS AND CAUTIONS

Make sure POWER is COMPLETELY OFF at the fuse box
Have your fixture installed by a qualified licensed electrician
Prepare everything in a clear area
Wear gloves at all times during this installation
Read instructions carefully before you start assembly
Keep this installation sheet for future reference

Please Note: 120V input

NOTICE

The important safeguards and instructions outlined in this sheet cannot cover all possible conditions and situations that may occur. It must be understood that caution and certain care factors must be followed. These instructions are provided for your safety and we highly recommend that a licensed, trained electrician install this unit.
This fixture is designed to be mounted on a correctly installed standard round or octagon box OR through a wiring box with a plaster frame. The box must be securely mounted to the structure of the building. The crossbar and hardware supplied should be used, directly mounting the fixture to the outlet box may make it impossible to correctly align the fixture.

Assembly Instructions

Step 1
Remove the fixture from its original package.
Step 2
Separate mounting plate (1c) from canopy (2a) by removing canopy screws (2b).
Step 3
Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in the hardware package.
Step 4
Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in the hardware package.
Step 5
Attach canopy (2a) to mounting plate (1c) with canopy screws (2b).
Step 6
Install the recommended lamp (4a) (not provided) (referred to on the socket label for maximum wattage and type) to the fixture socket.