alora WV320108 Wall Lamp Instruction Manual
- June 13, 2024
- aLora
Table of Contents
alora WV320108 Wall Lamp
Product Information
- Product Name: WV320108 Wall Lamp
- Technical Support: 1.855.855.8926
- Email: technicalsupport@aloralighting.com
- Manufacturer: Alora Lighting
- Model Number: WV320108
- Country of Origin: Not specified
Warnings and Cautions:
Please Note:
- 1a.
- 1b.
- 4a.
- 1c.
- 1e.
- 2a.
- 2b.
- 3a.
Assembly Instructions
- Step 1: Remove the fixture from its original package.
- Step 2: Separate the mounting plate (1c) from the canopy (2a) by removing the ring (2b).
- Step 3: Make proper electrical connections by using wire nuts (1b) provided in the hardware package. Connect black wire to hot L, white wire to neutral N, and ground wire to GND. Place the driver (4a) in the electrical junction box (1a).
- Step 4: Attach the mounting plate (1c) to the electrical junction box (1a) using the junction box screws (1e) provided in the hardware package.
- Step 5: Secure the canopy (2a) to the mounting plate (1c) with the ring (2b), followed by attaching the glass (3a) by threading clockwise.
Product Usage Instructions
- Carefully remove the wall lamp from its packaging.
- Separate the mounting plate (1c) from the canopy (2a) by removing the ring (2b).
- Ue the wire nuts (1b) provided in the hardware package to make the proper electrical connections. Connect the black wire to the hot L terminal, the white wire to the neutral N terminal, and the ground wire to the GND terminal. Place the driver (4a) in the electrical junction box (1a).
- Attach the mounting plate (1c) to the electrical junction box (1a) using the junction box screws (1e) provided in the hardware package.
- Securely attach the canopy (2a) to the mounting plate (1c) using the ring (2b).
- Finally, attach the glass (3a) to the canopy by threading it clockwise.
Now your wall lamp is ready to be enjoyed!
Contact Information:
For further assistance, please contact:
Phone: 1.855.855.8926
Canada Address: 19054 28th Avenue Surrey – BC V3Z 6M3
USA Address: 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
Website: www.aloralighting.com
Date: 20230619
Safety Instruction
WARNINGS AND CAUTIONS
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all times during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
Please Note:
- This Alora LED fixture comes with pre-wired LED module(s)
- Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary contact with the module could cause permanent damage
- For dimming, an ELV (Electronic Low Voltage) or TRIAC type of dimmer is required
- 120V input
NOTICE
- The important safeguards and instructions outlined in this sheet cannot cover all possible conditions and situations that may occur. It must be understood that caution and certain care factors must be followed. These instructions are provided for your safety and we highly recommend that a licensed, trained electrician install this unit.
- This fixture is designed to be mounted on a correctly installed standard round or octagon box OR through a wiring box with a plaster frame. The box must be securely mounted to the structure of the building. The crossbar and hardware supplied should be used, directly mounting the fixture to the outlet box may make it impossible to correctly align the fixture.
ASSEMBLY INSTRUCTIONS
-
Step 1
Remove fixture from its original package. -
Step 2
Separate mounting plate (1c) from canopy (2a) by removing ring (2b). -
Step 3
Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in hardware package and place driver (4a) in electrical junction box (1a). -
Step 4
Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in hardware package. -
Step 5
Secure canopy (2a) to mounting plate (1c) with ring (2b), followed by glass (3a) by threading clockwise.
You are now ready to enjoy your fixture.
P: 1.855.855.8926
CANADA : 19054 28th Avenue Surrey – BC V3Z 6M3
USA : 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
www.aloralighting.com
20230619