alora CH352430 Four Light Chandelier in Antique White Instructions
- June 13, 2024
- aLora
Table of Contents
alora CH352430 Four Light Chandelier in Antique White
WARNINGS AND CAUTIONS
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all times during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
NOTICE
- The important safeguards and instructions outlined in this sheet cannot cover all possible conditions and situations that may occur. It must be understood that caution and certain care factors must be followed. These instructions are provided for your safety and we highly recommend that a licensed, trained electrician install this unit.
- This fixture is designed to be mounted on a correctly installed standard round or octagon box OR through a wiring box with a plaster frame. The box must be securely mounted to the structure of the building. The crossbar and hardware supplied should be used, directly mounting the fixture to the outlet box may make it impossible to correctly align the fixture.
ASSEMBLY INSTRUCTIONS
Step 1
Remove fixture from its original package.
Step 2
Remove the mounting plate (1c) from within the canopy (2a) by loosening the
finial (3a).
Step 3
Attach mounting plate (1c) to electrical junction box (1a) using junction box
screws provided (1e) in hardware package.
Step 4
Determine hanging height of fixture by selecting from chain supplied (2d).
Remove any unwanted length by opening the last link with chain pliers and
install the top quick link (2c) to the beginning end of the chain, after
weaving fixture wires through chain and secure top quick link (2c) to the
canopy (2a).
Step 5
Make proper electrical connections (black to hot “L”, white to neutral “N”,
ground to “GND”) with wire nuts (1b) provided in hardware package.
Step 6
Attach canopy (2a) to mounting plate (1c) with finial (3a) by threading
clockwise.
Step 7
Install the recommended lamp (4a) (not provided) (referred on the socket label
for maximum wattage and type) to fixture socket (4b).
You are now ready to enjoy your fixture.
CUSTOMERS SUPPORT
P: 1.855.855.8926
CANADA : 19054 28th Avenue Surrey – BC V3Z 6M3
USA :3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
www.aloralighting.com
20230619
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>