alora CH343625 6 Light Chandelier Instruction Manual
- June 13, 2024
- aLora
Table of Contents
alora CH343625 6 Light Chandelier Instruction Manual
WARNINGS AND CAUTIONS
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all times during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
Please Note: · 120V input
NOTICE
- The important safeguards and instructions outlined in this sheet cannot cover all possible conditions and situations that may occur. It must be understood that caution and certain care factors must be followed. These instructions are provided for your safety and we highly recommend that a licensed, trained electrician install this unit.
- This fixture is designed to be mounted on a correctly installed standard round or octagon box OR through a wiring box with a plaster frame. The box must be securely mounted to the structure of the building. The crossbar and hardware supplied should be used, directly mounting the fixture to the outlet box may make it impossible to correctly align the fixture.
ASSEMBLY INSTRUCTIONS
Step 1 Remove fixture from its original package.
Step 2 Remove the mounting plate (1c) from within the canopy (2a) by
removing canopy screws (2b)
Step 3 Attach mounting plate (1c) to electrical junction box (1a) using
junction box screws provided (1e) in hardware package.
Step 4 Determine hanging height of fixture by selecting from chain
supplied (2d). Remove any unwanted length by opening the last link with chain
pliers and install the top quick link (2c) to the beginning end of the chain,
after weaving fixture wires through chain and secure top quick link (2c) to
the canopy (2a) and fixture (3a).
Step 5 Make proper electrical connections (black to hot “L”, white to
neutral “N”, ground to “GND”) with wire nuts (1b) provided in hardware
package.
Step 6 Attach canopy (2a) to mounting plate (1c) with canopy screws (2b).
Step 7 Install the recommended lamp (4a) (not provided) (referred on the
socket label for maximum wattage and type) to fixture socket.
P: 1.855.855.8926
CANADA : 19054 28th Avenue Surrey – BC V3Z 6M3
USA : 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
www.aloralighting.com 20230619
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>