aLora CH340041PB Yukari 16 Light Chandelier User Guide

Table of Contents

aLora-CH340041PB-Yukari-16-Light-Chandelier-PRODUCT

Warnings and Cautions

Please read and follow the warnings and cautions provided in the user manual to ensure safe usage of the chandelier.

Assembly Instructions

Step 1: Remove the chandelier from its original package.
Step 2: Loosen the mounting collar nut (2b) and remove the mounting plate (1c) from within the canopy (2a).
Step 3: Attach the mounting plate (1c) to the electrical junction box (1a) using the provided junction box screws (1e) from the hardware package.
Step 4: Thread the upper fixture body (3a) onto the lower fixture body (3b) in a clockwise direction, after pulling wires through.
Step 5: Determine the desired hanging height of the chandelier by selecting a chain (2e) from the supplied options. Remove any excess length by opening the last link with chain pliers. Weave the fixture wires through the chain and secure the top quick link (2d) to the beginning end of the chain. Attach the top quick link (2d), chain connector (2c), and upper fixture body (3a) together.
Step 6: Make proper electrical connections by using wire nuts (1b) provided in the hardware package. Connect the black wire to the hot L terminal, the white wire to the neutral N terminal, and the ground wire to the GND terminal.
Step 7: Install the recommended lamp (4a) (not provided) into the fixture socket. Secure leaves skewers to the desired location on the fixture body by threading them clockwise (refer to Page 2
for skewer locations).
Step 8: Attach the chain connector (2c) to the mounting plate (1c), followed by the canopy (2a). Secure everything in place using the mounting collar nut (2b).

You are now ready to enjoy your chandelier.

Technical Support

If you have any technical questions or need assistance, please contact our technical support team:

WARNINGS AND CAUTIONS

Please Note:

NOTICE

The important safeguards and instructions outlined in this sheet cannot cover all possible conditions and situations that may occur. It must be understood that caution and certain care factors must be followed. These instructions are provided for your safety and we highly recommend that a licensed, trained electrician install this unit.
This fixture is designed to be mounted on a correctly installed standard round or octagon box OR through a wiring box with a plaster frame. The box must be securely mounted to the structure of the building. The crossbar and hardware supplied should be used, directly mounting the fixture to the outlet box may make it impossible to correctly align the fixture

$aLora-CH340041PB-Yukari-16-Light-Chandelier-FIG- $1$$

Step 1
Remove fixture from its original package.
Step 2
Remove the mounting plate (1c) from within the canopy (2a) by loosening the mounting collar nut (2b).
Step 3
Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in hardware package.
Step 4
Attach upper fixture body (3a) to lower fixture body (3b) by threading clockwise, after pulling wires through.
Step 5
Determine hanging height of fixture by selecting from chain supplied (2e). Remove any unwanted length by opening the last link with chain pliers and install the top quick link (2d) to the beginning end of the chain, after
weaving fixture wires through chain and secure top quick link (2d) to chain connector (2c) and upper fixture body (3a).
Step 6
Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in hardware package
Step 7
Install the recommended lamp (4a) (not provided) (referred on the socket label for maximum wattage and type) to fixture socket. Secure leaves skewers to fixture body to desired location by threading clockwise (See
Page 2 for skewer locations).
Step 8
Attach chain connector (2c) to mounting plate (1c), followed by canopy (2a) and secure with mounting collar nut (2b). You are now ready to enjoy your fixture