FORTIN 63671 Dodge RAM 2008 Standard Key Remote Starters And Alarm Systems Installation Guide

FORTIN 63671 Dodge RAM 2008 Standard Key Remote Starters And Alarm

Systems

Product Information

Product Name: Vehicle Remote Starter
Brand: Dodge RAM
Model Year: 2008
Firmware Version: 74.[38] Compatibility: Chrysler/Dodge/Jeep/Mitsubishi vehicles

Product Usage Instructions

1. Firmware Update: – To add the latest firmware version and options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool (sold separately).

2. Program Bypass Option: – Unit Option: C1 – If the vehicle is not equipped with a functional hood pin: – Option A11 should be set to OFF.

3. Mandatory Installation: – If the vehicle can be remote started with the hood open, set function A11 to OFF.
   Notice: The installation of safety elements is mandatory. The hood pin is an essential security element and must be installed.
   Ensure that this module is installed by a qualified technician, as a wrong connection can cause permanent damage to the vehicle.

4. Wiring Connection
   Follow the wiring connections as mentioned in the user manual.

5. Connect various inputs and outputs to the respective terminals.
   If using data-link, direct connection is always required

6. Vehicle Transponder Connector:

7. Take care when disconnecting the harness from the immobilizer connector, as it is very fragile.

8. Remote Start Procedure:
   Ensure all doors are closed.
   Use the remote-starter remote or the OEM remote to unlock the doors.

9. Remote start the vehicle by following the instructions provided with the remote starter.
   Note: Please refer to the complete user manual for detailed instructions, safety precautions, and troubleshooting information.

REGULAR INSTALLATION

Parts required (Not included)

• 1X Fuse
• 1X Resistor

**MANDATORY INSTALL

• HOOD PIN
  HOOD STATUS :** THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

WIRING CONNECTION

PROGRAMMING PROCEDURE

1. Press and hold the programming button: Connect the 4-PIN Data-link harness (Black connector).
   The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate

2. Release the programming button when the LED is BLUE. If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.

3. Insert the required remaining connectors

4. Turn the key to the Ignition ON/RUN position.
   The BLUE LED will flash rapidly.

5. Turn the key to the OFF position.
   The BLUE LED will flash rapidly.

6. Press the LOCK button on the vehicles OEM remote.
   Press and release the programming Appuyez sur le bouton de button on the module once.
   The BLUE LED will tum off.

The module is now programmed. Use the remote of the remote starter or security system to tesi all of the supported features to ensure proper programming.

REMOTE STARTER FUNCTIONALITY

• All doors must be closed.
• Remote start the vehicle.
• Unlock the doors with the remote-starter remote or the OEM remote.
• Insert and Turn the key to the Ignition ON/RUN position.
• Press the brake pedal.
• The vehicle can now be put in to gear and driven.

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

If the vehicle is not unlocked with one of these conditions the remote-starter will shut down as soon as any door is opened.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN

ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>