FeinTech LTL00310 LED Desk Lamp 50cm Instruction Manual
- June 13, 2024
- FeinTech
Table of Contents
FeinTech LTL00310 LED Desk Lamp 50cm
Conditions of use
- Attach the lamp to the desk as described here and avoid the displayed errors.
- To avoid damage from overheating, do not cover the lamp or the power supply. Do not install near a heat source!
- Avoid wetness and operation in very humid environments. Condensation after cooling may damage the lamp.
- Use only the supplied power supply to prevent possible damage or fire caused by overloading.
- We recommend unplugging the power supply unit if the light is not used for a long time. This saves maximum energy and increases safety. To avoid damage, do not pull on the cable.
- The LED modules have a long lifetime and are not interchangeable. Therefore, do not open the lamp.
- Adjust the lamp’s gooseneck while holding it in the middle of the lamp unit. Avoid frequent and rigorous twisting to prevent damage. Adjust the light unit so that you do not look directly into the bright light surface.
Technical data
| model: | LTL00310 | LTL00320 (white)/ LTL00321 (black) |
|---|---|---|
| brightness | 600 Lumen, 5-way dimmable | 1400 Lumen, 5-way dimmable |
| correlated colour temperature CCT | 2700 – 6500 K switchable | 2700 – 6500 K |
switchable
power supply (adaptor included)| 20 V DC/ 0.37 A| 10V DC/ 1.8 A
power consumption Pon| max. 9W| max.20W
standby power consumption Psb| 0.15W| 0.15W
weight| 1.3 kg| 1.6 kg
size (W x D x H)| 500 x 59 x 400-530 mm| 800 x 59 x 540-650 mm
This product contains a light source of energy efficiency class G according to
Regulation (EU) No 2019/2015 (01.09.2021). The lamps cannot be replaced in the
luminaire.
Installation and operation
- Attach the supplied clamp ❾ to a table top up to 65 mm thick. Ensure secure fastening!
- Insert the light unit ❶ into the holder ❻. You can mount the light unit as in ① or ②. Fasten both parts with the supplied screw and the Allen key.
- Plug the 2-piece power cable ❽ together and then insert the power supply unit ❼. The luminaire can now be switched on via ❷.
- Adjust the brightness in 5 steps by tipping the up ❹ or ❺ down key. The light colour can be set in 4 steps via ❸. The last setting remains stored and will be used the next time it is switched on.
Do NOT mount the clamp in this way:
Bug fixing
for possible defects. Make sure that neither humidity nor extreme temperatures cause the problem. Contact your dealer or Fein Tech if you suspect a defect.
After-sales service
Contact your dealer or Fein Tech if you have any questions about the application or problems after purchase. You can reach us via e-mail, Facebook or our website. Please do not send the device to your dealer or Fein Tech without consulting them.
Environmentally friendly disposal
Your product is designed and manufactured with high quality materials and
components that can be recycled and reused.
This symbol means that this product cannot be thrown into the regular
household waste with other wastes. Waste electronic equipment Is collected
separately. We strongly advise you to take your product to an official
collection point. Find out about the local collection system for electrical
and electronic products and rechargeable batteries.
E We hereby declare that this product complies with the legal requirements, in particular EU Directives 2014/35/EC LVD, 2014/30/EC EMC, 2009/125/EU ERP, 2011/65/EU + Commission Delegated Directive (EU) 2015/863/EU RoHS 2. You can obtain a complete declaration of conformity at http://feintech.eu/ce
Customer Support
Fein Tech is a registered trademark of Spreewald Kommunikationstechnik GmbH ·
www.feintech.eu
Radensdorfer Hauptstr. 45 a· 15907 Lubben (Spreewald) ·Germany·
info@feintech.eu · +49 3546 239 8855
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>