FORTIN 102941 2017 Volkswagen Golf R Push Button Remote Starters and Alarm Systems Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
- THAR-VW1 STAND ALONE INSTALLATION
- MANDATORY INSTALL
- PARTS REQUIRED (NOT INCLUDED)
- MANDATORY
- STAND ALONE CONFIGURATION
- REMOTE STARTER FUNCTIONALITY
- REMOTE STARTER DIAGNOSTICS
- REMOTE STARTER WARNING CARD
- DESCRIPTION
- AUTOMATIC TRANSMISSION WIRING CONNECTION
- PROGRAMMING PROCEDURE
- REMOTE STARTER FUNCTIONALITY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
FORTIN 102941 2017 Volkswagen Golf R Push Button Remote Starters and Alarm
Systems Installation Guide
THAR-VW1 STAND ALONE INSTALLATION
ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES.
| Vehicle functions supported
in this diagram (functional if equipped) |
---|---
Key Control| T-Harness available (sold separately)| Lock| Unlock| Arm| Disarm|
Hazard Lights| Tachometer| AUX.1Comfort Group Groupe confort| Door Status|
Trunk Status| Hood Status*| Hand-Brake Status| Foot-Brake Status| OEM Remote
monitoring
VEHICLE VEHICULES| YEARS ANNÉES| Heated seats| Rear defrost
VOLKSWAGEN
Golf-R| Push-to-Start| 2015-2018| •| •| •| •| •|
•| •| •| •| •| •| •| •| •| •|
•
Program bypass option:
UNIT OPTION
FIRMWARE VERSION VERSION LOGICIELLE
61.[19] MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER
or
FLASH LINK MOBILE tool, sold separately
| Program bypass option:| UNIT OPTION OPTION UNITE| DESCRIPTION
---|---|---|---
C1| OEM Remote status (Lock/Unlock) monitoring
| D6| Push-to-Start
Push-to-Start
Program bypass option (If| D2| Unlock before / Lock after (Disarm
OEM alarm)
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:| A11|
OFF NON| Hood trigger (Output Status).
Contact de capot
Parts required (Not included) 1x Vehicle Key
1 KEY REQUIRED FOR THE INSTALLATION
MANDATORY INSTALL
**HOOD PIN
HOOD STATUS** : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF
Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
PARTS REQUIRED (NOT INCLUDED)
FLASH LINK UPDATER,
FLASH LINK MANAGER
SOFTWARE
Microsoft Windows Computer
with Internet connection
Ordinator Microsoft Windows avec connection Interne.
FLASH LINK MOBILE
FLASH LINK MOBILE APP
Smartphone Android or iOS with Internet connection (provider charges may
apply).
MANDATORY
HOOD **PIN
** REMOTE START SAFETY OVERRIDE SWITCH
VALET SWITCH COMMUTATEUR VALET
Part #: RSPB available, Sold separately
Notice: the installation of safety elements are mandatory.
The hood pin and the valet switch are essential security elements and must be
installed.
STAND ALONE CONFIGURATION
**| Program bypass option OEM Remote Stand Alone Remote Starter:| |
---|---|---|---
D1.1 UN| LOCK, UNLOCK, LOCK
VERROUILLE,**
| **Program bypass option with omen remote:| UNIT OPTION OPTION
UNITE| DESCRIPTION
---|---|---|---
C1| OEM Remote Monitoring
Supervision de la t
**| Program bypass option with RF KIT antenna:| UNIT OPTION OPTION
UNITE| DESCRIPTION
---|---|---|---
H1 to H6 H1 à H6| Supported RF Kits and select RF Kit
Kit RF le KIT RF
REMOTE STARTER FUNCTIONALITY
-
All doors must be closed.
-
Press the OEM remote’s Lock Unlock Lock buttons to remote-start (or remote-stop) the vehicle.
-
The vehicle will START
REMOTE STARTER DIAGNOSTICS
MODULE RED LED
x2 flash : Brake ON
x3 flash : No tach
x4 flash : Ignition ** before start
x5 flash :** Hood Open
REMOTE STARTER WARNING CARD
CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE:
or use the package RSPB, Sold separately.
WARNING
REMOTE STARTER
THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE DASHBOARD BEFORE WORKING ON THE VEHICLE.
DESCRIPTION
Pull the clips to release the cover of the connector.
AUTOMATIC TRANSMISSION WIRING CONNECTION
PROGRAMMING PROCEDURE
Press hold Connect and the programming button: the 4-PIN Data-link
harness (Black connector).
The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.
Release the programming button when the LED is BLUE.
If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.
Insert the required remaining connectors
Do not press the brake pedal.
Press the Push-to-Start button once to turn on the ignition.
The BLUE LED will flash rapidly
Press the Push-to-Start button once to turn off the ignition
The BLUE LED will turn off.
The module is now programmed.
REMOTE STARTER FUNCTIONALITY
-
All doors must be closed.
-
Remote start the vehicle.
-
Unlock the doors with either:
- The OEM remote
- The remote-starter remote.
-
Enter the vehicle with the Intelligent Smart Key .
-
The vehicle can now be put in to gear and driven.
Notice: Updated Firmware and Installation Guides Updated fi rewire and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever pertaining to the accuracy or currency of the
information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualified technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING
TECH SUPPORT
Tell: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>