FORTIN 103001 2017 Volkswagen Golf R Push Button Remote Starters and Alarm Systems Installation Guide

THAR-VW1 STAND ALONE INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION

103001 2017 Volkswagen Golf R Push Button Remote Starters and Alarm

Systems

ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES.

| COMPATIBLE MODULE REQUIRED:| QR CODE ON THE LABEL| FIRMWARE VERSION| To add the firmware version and the options, use the LASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
---|---|---|---|---
MANUFACTURED AFTER: 2019
| Parts required (Not included)
---|---
| 1x TB-VW (key bypass)

PROGRAMMING TOOL REQUIRED for key bypass programming.
Sold separately.
WARNING Vehicle’s equipped with Virtual Cluster, not supported for the key bypass.
MANDATORY INSTALL
* HOOD PIN HOOD STATUS: THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF. Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
NOTES

| Program bypass option:| UNIT OPTION| DESCRIPTION
---|---|---|---
C1| OEM Remote status (Lock/Unlock) monitoring
| D6| Push-to-Start
Program bypass option
(If equiped with OEM alarm):| D2| Unlock before / Lock after (Disarm OEM alarm)
---|---|---
IF THE VEHICLE IS NOT EQUIPPED
WITH FUNCTIONAL HOOD PIN:| A11| | Hood trigger (Output Status).
---|---|---|---

PARTS REQUIRED (NOT INCLUDED)

FLASH LINK UPDATER,
FLASH LINK MANAGER
SOFTWARE | PROGRAMME
Microsoft Windows Computer with Internet connection
OR
OU
FLASH LINK MOBILE
FLASH LINK MOBILE APP
Smartphone AndroId or iOS with Internet connection (provider charges may apply).
MANDATORY
HOOD PIN REMOTE START SAFETY OVERRIDE SWITCH Part #: RSPB available, Sold separately.
Notice: the installation of safety elements are mandatory.
The hood pin and the valet switch are essential security elements and must be installed.

STAND ALONE CONFIGURATION

| Program bypass option
OEM Remote Stand Alone Remote Starter:| | LOCK, UNLOCK, LOCK
---|---|---|---
| Program bypass option with oem remote:| UNIT OPTION| DESCRIPTION
---|---|---|---
C1| OEM Remote Monitoring
| Program bypass option with RF KIT antenna:| UNIT OPTION| DESCRIPTION
---|---|---|---
H1 to H6| Supported RF Kits and select RF Kit

REMOTE STARTER FUNCTIONALITY

REMOTE STARTER DIAGNOSTICS
MODULE RED LED

REMOTE STARTER WARNING CARD
CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE:
or use the package RSPB, Sold separately.
WARNING
REMOTE STARTER
THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE DASHBOARD BEFORE WORKING ON THE VEHICLE.

DESCRIPTION

AUTOMATIC TRANSMISSION WIRING CONNECTION

DCRYPTOR PROGRAMMING PROCEDURE

Parts required (not included)
FLASH LINK UPDATER,
FLASH LINK MANAGER
SOFTWARE | PROGRAMME
Microsoft Windows Computer with Internet connection
OR
OU
FLASH LINK MOBILE
FLASH LINK MOBILE APP
Smartphone Android or iOS with Internet connection (Internet provider charges may apply) BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE. KEY BYPASS PROGRAMMING PROCEDURE 2/4 Press and hold the programming button:
Connect the 4-Pin Data-link connector.
The BLUE, RED, YELLOW and BLUE & RED LEDs will alternatively illuminate.Release the programming button when the LED is BLUE.

If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.Insert the required remaining connectors.Press the Push-to-Start button to turn ON the ignition.Press and release the programming button once (1x).
The BLUE LED will turn off.
Wait,
The BLUE LED will flash rapidly.Press and hold the programming button.
The BLUE LED will turn OFF.
Wait,
The RED LED will turn ON.
Release the programming button.
CONTINUED NEXT PAGE KEY BYPASS PROGRAMMING PROCEDURE 3/4 Wait, do not touch the vehicle or the module.
The BLUE, RED and YELLOW LEDs will rapidly alternate.
the RED LED to turn ON.
Wait,
the YELLOW LED will flash once. Wait,
Wait for the RED and YELLOW LEDs to slowly alternate.
If the RED LED flashes slowly, the programming has failed, go back to step1 and start the programming over. Press the Push-to-Start button once to turn off the ignition. CONTINUED NEXT PAGE
KEY BYPASS PROGRAMMING PROCEDURE 4/4
NOTE
IF PROGRAMMING IS INTERRUPTED DURING THE PROCESS, SUCH AS A MODULE IS DISCONNECTED OR BY TURNING OFF THE IGNITION WITH THE KEY, IT IS POSSIBLE THAT THE VEHICLE WILL NO LONGER START NORMALLY, YOU MUST DISCONNECT AND RECONNECT THE VEHICLE BATTERY TO CORRECT THE SITUATION. REMOTE STARTER FUNCTIONALITY Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

Copyright © 2006-2019, FORTIN AUTO RADIO INC
ALL RIGHTS RESERVED PATENT PENDING
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE
This guide may change without notice. See www.fortin.ca for latest version.
REV.: 20211020
Guide # 103001

References

• Over

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>