MINKA LAVERY 4713-892 Ryton Wall Sconce Instruction Manual
- June 13, 2024
- MINKA LAVERY
Table of Contents
MINKA LAVERY 4713-892 Ryton Wall Sconce Instruction Manual
For item #4713-892
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
PREPARING FOR INSTALLATION (Fig. 1)
- Shut off the power at the fuse box or circuit breaker. If necessary, remove old fixture, including mounting hardware.
- Carefully remove the fixture from the carton and check that all parts are included as shown in the illustration.
- With the ground screw facing out, thread mounting screws (C) into mounting bracket (A) holes. Screws can be adjusted if necessary.
- Secure mounting bracket (A) to junction box with junction box screws (B) ensuring mounting screws (C) are level.
CONNECTING THE WIRES (Fig. 2)
5. Connect the electrical wires as shown in Fig. 2. Ensure all wire
connectors are secure. If your junction box has a ground wire (green or bare
copper), connect the fixture’s ground wire to it. Otherwise, connect the
fixture’s ground wire directly to the green ground screw on the mounting
bracket (A).
6. Tuck wire connections neatly into junction box.
INSTALLING THE FIXTURE (Fig. 3)
7. Place canopy (D) over mounting bracket (A) and secure with threaded caps
(E).
8. Slide cups (F) over sockets.
9. Install (3) three candelabra base bulbs up to 60 watts or CFL or LED
equivalent (not included) in accordance with the fixture specification—DO NOT
EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE
MAXIMALE!)
Your installation is now complete. Return power to the junction box and test the fixture.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>