Minka Lavery 5616-695-L Boada 1-Light 14-in Soft Brass LED Semi Flush Mount Light Instruction Manual

June 13, 2024
MINKA LAVERY

INSTALLATION INSTRUCTIONS
For item# 5616-695-L (New. 2023/02/16)
READ AND SAVE THESE INSTRUCTIONS

5616-695-L Boada 1-Light 14-in Soft Brass LED Semi Flush Mount Light

Minka Lavery 5616-695-L Boada 1-Light 14-in Soft Brass LED Semi Flush Mount
Light

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
PREPARING FOR INSTALLATION (Fig. 1)
Minka Lavery 5616-695-L Boada 1-Light 14-in Soft Brass LED Semi Flush
Mount Light - fig 1

  1. Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.

  2. Carefully unpack your new fixture and lay out all the parts in a clean area. Take care not to misplace any small parts necessary for installation.
    ASSEMBLING THE FIXTURE (Fig.1)

  3. Remove screws (D) on mounting plate (A) from fixture’s body (C).

  4. Secure mounting plate (A) to junction box (not included) using mounting screws (B) (Size: #8-32N*L0.5”). The side of the mounting plate (A) marked with “GND” and two convex points must face out.
    CONNECTING THE WIRES (Fig. 2)
    Minka Lavery 5616-695-L Boada 1-Light 14-in Soft Brass LED Semi Flush
Mount Light - fig 2

  5. Connect the electrical wires as shown in (Fig.2).
    Making sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect fixture’s ground wire directly to mounting plate (A) using green screw provided.

  6. Tuck wire connectors neatly into the junction box.
    COMPLETING THE INSTALLATION (Fig. 1)

  7. Place canopy (C) over mounting plate (A) and secure with screws (D).

Note : The LED module should be provided by a specified supplier.
Dimmable with ELV and/or LED compatible wall dimmer switches.
Your installation is now complete. Return power to the junction box and test the fixture.
Note: Illustration (Fig. 1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

LA-3650E

Documents / Resources

| Minka Lavery 5616-695-L Boada 1-Light 14-in Soft Brass LED Semi Flush Mount Light [pdf] Instruction Manual
5616-695-L Boada 1-Light 14-in Soft Brass LED Semi Flush Mount Light, 5616-695-L, Boada 1-Light 14-in Soft Brass LED Semi Flush Mount Light, LED Semi Flush Mount Light, Flush Mount Light
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

MINKA LAVERY User Manuals

Related Manuals