FORTIN 2017 Standard Key Remote Starters and Alarm Systems Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
REV.: 20211119
Guide # 72711
THAR-FOR4 THARNESS INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION
2017 Standard Key Remote Starters and Alarm Systems
VEHICLE YEARS
FORD 2014-2019
Vehicle functions supported in this diagram (functional if equipped)
| • | Contournement |
|---|---|
| • | T-Harness |
| • | Lock |
| • | Unlock |
| • | Arm |
| • | Disarm |
| • | RAP Disable |
| • | Trunk Release |
| • | Parking Lights |
| • | Horn |
| • | Tachometer |
| • | Hood |
| • | Door Status |
| • | Trunk Status |
| • | Hood Status* |
| • | Hand-Brake Status |
| • | Foot-Brake Status |
| • | OEM Remote monitoring |
| • | R.S. OEM remote |
Stand Alone compatible
BYPASS FIRMWARE VERSION
71. [52] FORD MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or
FLASH LINK MOBILE tool, sold separately.
Program bypass option:
| UNIT OPTION | DESCRIPTION |
|---|---|
| C1 | OEM Remote status (Lock/Unlock) monitoring |
| D5 | Lock after start |
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:
Hood trigger (Output Status).
Program remote starter option:
| FUNCTION | MODE | DESCRIPTION |
|---|---|---|
| 8 | 2 | Double 0.25 sec unlock pulse |
Program remote starter option for R.S.
OEM REMOTE STAND ALONE:
| FUNCTION | MODE | DESCRIPTION |
|---|---|---|
| 38 | 2 | Enable |
Press 3x Lock to remote start with the OEM remote.
Parts required (Not included)
| 1x | Relay (Parking lights) |
|---|---|
| 3x | Diodes 1Amp |
| 1x | THAR-FOR4 |
MANDATORY INSTALL
* HOOD PIN HOOD STATUS: THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
SECURITY STICKER
WARNING
Included
Notice: the installation of safety elements are mandatory. The hood pin
and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION
CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
DESCRIPTION
Make the connection between the UNIT and the T-HARNESS
WIRING CONNECTION
KEY BYPASS PROGRAMMING PROCEDURE
2 KEY REQUIRED
Press and hold the
programming button:
Connect the 4-PIN Data-link harness (Black connector).
The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.
Release the programming button when the LED is RED.
LEDs are ON.
If the LED is not solid RED and RED disconnect the 4-PIN Data-link harness
(Black connector).Connect the
required remaining harnesses.
Turn the first functional key to the Ignition ON/RUN
position.
Wait 3 seconds.
Turn the key to the OFF
position.
Remove the first key.
Turn the second functional key to the Ignition
ON/RUN position.
Wait 3 seconds.
Turn the key
to the OFF position.
Remove the second key.
CAUTION The following step must be completed within 5 seconds.
Otherwise disconnect all connectors and go back to step 1.
Press and hold the programming button until the vehicle ignition turn ON.
Release the programming button.
The RED LED will flash rapidly 10x times.
Key bypass programmed.
The BLUE LED will flash rapidly.
CAN-Bus programmed.
If the LED is solid RED disconnect the 4 Pin connector (Data-Link) and go back
to step 1. The vehicle ignition will turn OFF.
The module is now programmed.
Use the remote of the remote starter or security system to test all of the
supported features to ensure proper programming.
REMOTE STARTER PROGRAMMING PROCEDURE
REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE
STARTER PROGRAMMING.
REMOTE STARTER FUNCTIONALITY
| All doors must be closed.
---|---
| Remote start the vehicle.
| Unlock the doors with the remote-starter remote or the OEM remote.
| Insert and Turn the key to the Ignition ON/RUN position.
| Press the brake pedal.
| The vehicle can now be put in to gear and driven.
www.fortinbypass.com
Module label
Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest fi rmware
and download the latest installation guide(s) prior to the installation of
this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit
before connecting to it. Only a computer safe logic probe or digital
multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no
liability or responsibility whatsoever pertaining to the accuracy or currency
of the information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualifi ed technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC
ALL RIGHTS RESERVED PATENT PENDING
This guide may change without notice. See www.fortin.ca for latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797 ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>