CMA DISHMACHINES H-1X High Temp Undercounter with Dispenser Instruction Manual
- August 9, 2024
- CMA Dishmachines
Table of Contents
- CMA DISHMACHINES H-1X High Temp Undercounter with Dispenser
- Product Specifications
- Product Usage Instructions
- FAQ
- Panels and Door
- Rear Plumbing
- Sump
- Booster
- Power Wiring Box
- Control Panel
- Pump and Motor
- Spray Arm Manifold
- Spray Arm Assembly
- Chemical Pumps
- Optional Chemical Alarm
- Dish Racks
- CONTACT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CMA DISHMACHINES H-1X High Temp Undercounter with Dispenser
Product Specifications
- Model: H-1X
- Manufacturer: CMA DISHMACHINES
- Address: 12700 Knott Avenue, Garden Grove, California 92841
- Contact: 800-854-6417
- Website: www.cmadishmachines.com
Product Usage Instructions
- Refer to the Parts Manual for a list of included parts.
- Assemble the Drain Pump, Switch, Heater, Thermostat, Valve, Contactor, and other components as per the manual.
- Ensure all parts are securely attached and connected.
- Install the Rear Panel, Base Foot, Cord Clip, Front Panel, and other panel components using the provided screws and nuts.
- Attach the Door Handle, Hinge, and related parts to the door assembly.
- Mount the Drain Pump Bracket and secure it with the Hex Flange Bolt.
- Connect hoses, clamps, and conduits following the plumbing diagram in the manual.
- Install the Inlet Chute, Rubber Hose, and other plumbing components as instructed.
- Assemble the Sump components including the Sump Heater, Float Switch, and related parts.
- Ensure proper connection of hoses and valves for efficient sump operation.
FAQ
- Q: Where can I purchase additional parts for the H-1X model?
- A: Additional parts can be bought from CMA DISHMACHINES directly through their website or by contacting their customer service at 800-854-6417.
- Q: How do I troubleshoot if the H-1X model is not functioning properly?
- A: Refer to the troubleshooting section in the user manual for common issues and solutions. If problems persist, contact CMA DISHMACHINES customer support for assistance.
Initial Parts Kit
P/N | DESCRIPTION | Qty |
---|---|---|
02107.65 | Drain Pump | 1 |
02107.73 | Switch, Reed Aleph | 1 |
02107.78 | Heater, Wash Tank | 1 |
02107.07 | Heater, 5kW/220V | 1 |
02107.08 | Thermistor, Probe Assm | 1 |
02103.19 | Thermostat, High Limit 240f | 1 |
02107.13 | Valve, Water Inlet 220V H-1X Series | 1 |
02107.06 | Contactor, 3 Pole 220VAC Coil | 1 |
02107.15 | Switch, Rocker DPST 250V Neon | 1 |
02107.21 | Kit, Control Board | 1 |
02103.51 | Contact, Switch Momentary (N.O.) | 1 |
02103.10 | Pump Motor Assm, 220V | 1 |
02107.39 | Spray Arm, H-1X Complete Assembly | 1 |
02107.33 | End Cap, Spray Arm, H-1X | 1 |
00415.20 | Chemical Pump Assm 220V | 1 |
02257.00 | Squeeze Tube, Norprene 8″ | 1 |
Panels and Door
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 4 | 00940.50 | Screw, Truss Slot SS 10-32×3/8″ |
2 | 1 | 02107.46 | Panel, Rear |
3 | 1 | 02107.47 | Weldment, Base |
4 | 4 | 02104.67 | Foot, Adjusting |
5 | 4 | 02107.48 | Nut 1/4-20 WH Serrated SS |
6 | 2 | 02107.49 | Screw, 1/4-20×5/8″ Truss SS Phil |
7 | 1 | 02107.50 | Panel, Front |
8 | 2 | 02107.51 | Cord Clip 5/8″ Push Mount |
9 | 2 | 02107.52 | Screw, 8-32×3/8″ Truss HD |
10 | 1 | 02107.53 | Handle, Door |
11 | 1 | 02107.54 | Weldment, Door |
ITEM NO. | NO. REQ’D | **P/N** | DESCRIPTION |
--- | --- | --- | --- |
12 | 4 | 02107.55 | Screw, RH Hex SS 1/4-20×5/16″ |
13 | 2 | 02107.56 | Hinge, Door |
14 | 2 | 02107.57 | Bracket, Door Hinge Receiver |
15 | 2 | 02107.58 | Rail, Tray |
16 | 4 | 13822.00 | Nut, Acorn 1/4-20 |
17 | 1 | 02107.59 | Weldment, Wash Tank |
18 | 1 | 02107.60 | Panel, Top |
19 | 1 | 02107.61 | Gasket, Door 23-5/8″ Lg Gray Silicon |
20 | 2 | 02107.62 | Plate, Locking Hinge |
— | 1 | 02107.63 | Assm, Door Incl #9, 10 & 11 |
— | 1 | 02107.64 | Assm, Door Incl #9, 10, 11, 12, 13 |
Rear Plumbing
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 1 | 02104.06 | Bracket, Drain Pump |
2 | 2 | 02103.16 | Bolt, Hex Flange 1/4-20 x 3/8 SS |
3 | 1 | 02107.65 | Drain Pump |
4 | 3 | 03101.00 | Clamp, Hose Gear |
5 | 5 | 00912.00 | Nut, 1/4-20 W/ Nylon Insert SS |
6 | 1 | 02107.66 | Hose, Drain Pump |
7 | 5 | 00924.00 | 1/4″ SS Washer |
8 | 2 | 02107.67 | Washer 17/64 x 1/2 x 0.32 14S |
9 | A/R | 02107.68 | Hose, Rubber 1/2″ID x 0.84″OD |
10 | 1 | 03101.47 | Clamp, SS Gear Min 1/2″ |
11 | 2 | N/A | Clamp, Double Conduit |
12 | 1 | 02107.69 | Gasket, Inlet Chute |
13 | 1 | 02107.70 | Chute, Inlet |
14 | A/R | 02107.71 | Hose, 5/8″ID x 1″OD PVC Braided |
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
--- | --- | --- | --- |
15 | 2 | 03101.00 | Clamp, Hose Gear SS 3/4-1 1/2″ #16 |
16 | 1 | 02106.19 | Drain Hose |
17 | A/R | 02107.72 | Conduit 1/2″ |
18 | 1 | 02107.73 | Switch, Reed Aleph |
19 | 2 | 02103.27 | Nut, Grip 6-32 W/ Nylon Insert |
20 | 1 | N/A | Anti Siphon Body |
21 | 1 | N/A | Washer, Silicon 7/8″IDx1-5/16ODx1/16 |
22 | 1 | N/A | Ball 3/8″ Diameter SS |
23 | 1 | N/A | O-Ring 5/16″ID x 9/16″OD x 1/8″ |
24 | 1 | N/A | Anti-Siphon Valve Nut |
25 | 3 | 00725.40 | Clamp, EMT 1/2″ |
26 | 2 | 02107.74 | Screw, #8×1/2″ Self Tapping |
27 | 1 | 02106.50 | Anti Siphon Valve Assm |
Sump
ITEM NO. | NO. REQ’D | **P/N** | **DESCRIPTION** |
---|---|---|---|
1 | 1 | 02107.75 | Scrap Screen |
2 | 1 | 02107.76 | Pump Suction Ring |
3 | 1 | 02107.77 | Gasket, Upper Sump |
4 | 1 | 02107.78 | Heater, Wash Tank |
5 | 1 | 02107.79 | Sump Bowl |
6 | 1 | 02107.80 | Locknut 1/2″ NPT NP |
7 | 1 | 02104.21 | O-Ring |
ITEM NO. | NO. REQ’D | **P/N** | **DESCRIPTION** |
--- | --- | --- | --- |
8 | 1 | 02107.81 | Adaptor, Thermistor |
9 | 1 | 02107.08 | Thermistor |
10 | 12 | 02107.83 | Washer 17/64″x1/2″x0.32 14S |
11 | 12 | 00912.00 | Nut, 1/4-20 W/Nylon Insert SS |
12 | 1 | 02107.84 | Gasket, Lower Sump |
13 | 1 | 02107.85 | Pump Suction Elbow |
Booster
ITEM NO. | NO. REQ’D | **P/N** | **DESCRIPTION** |
---|---|---|---|
1 | 1 | 02107.07 | Heater, 5kW/220V |
2 | 1 | 02107.08 | Thermistor |
3 | 1 | 02103.14 | Gasket |
4 | 1 | 02106.01 | Booster, Welded ASSM |
5 | 1 | 02103.21 | Clamp, SS Gear-Min. 1/2″ |
6 | 1 | 02107.09 | Plug, 1/8 Hex Countersunk SS |
7 | 2 | 02103.16 | Bolt, Hex Flange, 1/4-20×3/8″ SS |
8 | 2 | 00965.00 | Nut, Grip 6-32 W/Nylon Insert SS |
ITEM NO. | NO. REQ’D | **P/N** | **DESCRIPTION** |
--- | --- | --- | --- |
9 | 1 | 02103.19 | Thermostat, High Limit 240f |
10 | A/R | 03107.50 | Hose, Rubber 1/2″x0.84″ OD |
11 | 2 | 02107.08 | Thermistor |
12 | 1 | 02107.11 | Tee, Rinse |
13 | 2 | 02107.12 | Screw, M4x12MM SS Extra Wide Phil. |
14 | 1 | 02107.13 | Valve, Water Inlet 220V H-1X Series |
15 | 1 | N/A | Hose, 1/2″ |
Power Wiring Box
ITEM NO. | NO. REQ’D | __**P/N** | __**DESCRIPTION** |
---|---|---|---|
1 | 1 | 02106.02 | Label, Connection Box |
2 | 1 | 02106.03 | Cover, Box Wiring |
3 | 1 | 02106.04 | Box, Wiring |
4 | 2 | 00421.51 | Screw, 6-32 X 1/4″ |
5 | 1 | 13426.50 | Lug, Ground |
6 | 1 | 00905.82 | Screw, 1/4-20 X 3/8″ |
7 | 1 | 02106.05 | Block, Terminal 4-Pole |
ITEM NO. | NO. REQ’D | __**P/N** | __**DESCRIPTION** |
--- | --- | --- | --- |
8 | 2 | 00940.50 | Screw, 10-32 X 3/8″ Truss Head |
9 | 1 | 02106.15 | Bushing, Strain Relief, Small |
10 | 1 | 02107.06 | Contactor, 3-Pole 220VAC Coil |
11 | 2 | 00940.00 | Screw, 10-32 X 1/4″ |
12 | 1 | 02107.86 | Relay, DPDT, 30A, 220VAC Coil |
13 | 1 | 43078.01 | Label, Ground |
Control Panel
ITEM NO. | NO. REQ’D | **P/N** | **DESCRIPTION** |
---|---|---|---|
1 | 1 | 02107.15 | Switch, Rocker DPST 250V Neon |
2 | 2 | 02107.16 | Label, Facia H-1X |
3 | 2 | 02103.58 | Gasket, Steam |
4 | 2 | 02107.17 | Standoff, LED Display Board |
5 | 4 | 02104.91 | Screw, 6-18×1/4″ Panhead Phil SS |
6 | 1 | 02107.19 | Panel, Facia H-1X |
7 | 2 | 02104.68 | Nut, 10-32 |
8 | 2 | 02107.20 | Screw, #8 x 3/8″ |
9 | 1 | 02107.21 | Kit, Control Board |
10 | 1 | 00911.10 | Screw, 8-32×3/8 Truss HD |
ITEM NO. | NO. REQ’D | **P/N** | **DESCRIPTION** |
--- | --- | --- | --- |
11 | 1 | 02103.57 | Prime Switch |
12 | 1 | 02103.51 | Contact, Switch Momentary (N.O.) |
13 | 1 | 02103.52 | Housing, Push Button Switch |
14 | 1 | 02103.53 | Push Button, Green |
15 | 1 | 03485.00 | Switch Guard |
16 | 4 | 04086.00 | #10 Washer |
17 | 2 | 03801.00 | 10-32 Lock Nut |
— | 1 | 02107.22 | Harness, Switch – NOT SHOWN |
— | 1 | 02107.23 | Harness, Sensor – NOT SHOWN |
— | 1 | 02107.10 | Harness, Main – NOT SHOWN |
Pump and Motor
ITEM NO. | NO. REQ’D | **P/N** | **DESCRIPTION** |
---|---|---|---|
1 | 9 | 02103.01 | Screw, M4, Phil, Pan Head |
2 | 1 | 02103.02 | Impeller Housing Cover |
3 | 1 | 02107.01 | Nut, M6 (Left-hand thread) |
4 | 1 | 02103.04 | 1/4″ Lock Washer |
5 | 1 | 02103.05 | 17/64″ Plain Washer |
6 | 1 | 02107.02 | Impeller |
7 | 1 | 02103.07 | Pump Seal |
8 | 1 | 02103.30 | Pump Gasket |
9 | 1 | 02107.03 | Pump Backing Plate |
ITEM NO. | NO. REQ’D | **P/z** | **DESCRIPTION** |
--- | --- | --- | --- |
10 | 9 | 02103.08 | Nut, M4 |
11 | 1 | 02103.10 | Pump Motor Assm, 220V |
12 | 1 | 02103.37 | Motor Fan Cover |
13 | 1 | 02103.11 | Capacitor, 16 μF |
14 | 1 | 02107.04 | Wash Pump Bracket |
15 | 2 | 02107.05 | Bolt, Hex Flange 1/4-20 X 3/8″ SST |
*** | 02103.10 | Motor unavailable as separate part |
Spray Arm Manifold
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 2 | 03101.00 | Clamp, Hose Gear Hose 1-1/2″ SS |
2 | 2 | 00912.00 | Nut, Hex SS 1/4-20 Nylon Insert |
3 | 1 | 02107.40 | Hub, Upper Spray Arm |
4 | 4 | 02103.88 | Washer, Nylite |
5 | 4 | 00914.00 | Bolt 1/4-20 x 3/4″ Hex Head |
6 | 1 | 02103.83 | O-Ring, 2-1/8″OD x 1-3/4″ID x 3/16″ |
7 | 2 | 02107.39 | Spray Arm, H-1X Complete Assembly |
8 | 1 | 02103.81 | Hose, Upper Spray Arm |
9 | 1 | 02107.42 | Hub, Lower Spray Arm |
10 | 1 | 02107.43 | Manifold, Pump |
11 | 1 | 02107.44 | Hose, Pump Discharge |
12 | 4 | 02104.10 | Clamp, Hose Gear 1×13/16″ – 2×3/4″ SS |
13 | 1 | 02107.45 | Hose, Pump Suction |
Spray Arm Assembly
- The number of dots on the nozzles corresponds to the port in which it is assembled.
- The ports are keyed for the matching nozzle.
- Do not force a nozzle into the incorrect port.
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 1 | N/A | Nozzle 1, Spray Arm, H-1X |
2 | 1 | N/A | Nozzle 2, Spray Arm, H-1X |
3 | 2 | 02107.39 | Spray Arm, H-1X Complete |
4 | 1 | N/A | Nozzle 3, Spray Arm, H-1X |
5 | 4 | 02107.29 | Washer, Bearing Spray Arm, H-1X |
6 | 4 | N/A | Nozzle 4, Spray Arm, H-1X |
7 | 1 | N/A | Nozzle 5, Spray Arm, H-1X |
8 | 8 | 02107.32 | O-Ring, Nozzle Spray Arm, H-1X |
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
--- | --- | --- | --- |
9 | 16 | 02107.33 | End Cap, Spray Arm, H-1X |
10 | 2 | 02107.34 | Shaft, Spray Arm, H-1X |
11 | 4 | 02107.35 | Bearing, Spray Arm, H-1X |
12 | 2 | 02107.36 | Bearing, Housing Spray Arm, H-1X |
13 | 4 | 02107.37 | Nut, Bearing Spray Arm, H-1X |
— | — | 02107.38 | H-1X Nozzle Kit (Incl #1, 2, 4 & 6-9) |
Chemical Pumps
ITEM
NO. | REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 2 | 02103.21 | Clamp, SS Gear-Min 1/2″ |
2 | A/R | 03107.50 | Hose, Rubber 1/2″x0.84″ OD Rinse |
3 | 1 | 02107.14 | Bracket, Chemical Pump, H-1X |
4 | 2 | 00415.20 | Chemical Pump Assm, 220V |
Chemical Pumps
ITEM NO. | REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 2 | 02104.47 | Strainer |
2 | 2 | 02104.48 | Tube Stiffener, 1/2″ID x 11-7/8″ |
3 | 1 | 43078.05 | Label, Detergent |
3a | 1 | 43078.08 | Label, Rinse |
4 | A/R | 02104.37 | Hose, 1/4″ID x 3/8″OD |
5 | 4 | 00931.00 | 4.5″ Nylon Cable Tie |
6 | 2 | 02257.00 | Squeeze Tube Norprene 8″ |
7 | 8 | 00911.00 | Screw, 8-32×1/2″ Panhead |
8 | 2 | 00418.00 | Peristaltic Pump Cover |
9 | 2 | 00419.00 | Peristaltic Pump Rotor |
10 | 4 | 00919.00 | Screw, 10-32 x 1-1/2″ Panhead |
10a | 2 | 00918.10 | Screw, 10-32 x 1-1/2″ Flathead |
11 | 2 | 00417.10 | Peristaltic Pump Block (Black) |
12 | 2 | 00416.20 | Peristaltic Pump Motor 220V/60Hz |
13 | 4 | 00448.00 | Barrel Connector, Male |
14 | 4 | 02104.52 | Barb |
Optional Chemical Alarm
Part Number 12508.00
ITEM NO. | NO. REQ’D | __**P/N** | __**DESCRIPTION** |
---|---|---|---|
1 | 3 | 00400.00 | Conduit, 3/8” Sealtite |
2 | 1 | 00401.00 | S.T. 3/8” Straight Connector |
3 | 1 | 00402.00 | S.T. 90 Degree 3/8” Connector |
4 | 1 | 00406.00 | Control Box Light, .5” Diameter, Red |
5 | 1 | 00435.00 | Squeeze Tube, 8” |
6 | 1 | 00521.00 | Wire, 18 Gauge, Orange, 6 ft. |
7 | 1 | 00531.00 | Wire, 18 Gauge, White, 6 ft. |
ITEM NO. | NO. |
REQ’D
| __
P/N
| __
DESCRIPTION
---|---|---|---
8| 5| 00931.00| Wire Tie, Small
9| 1| 12510.00| Sanitizer Alarm Box Assembly
10| 1| 12511.00| Sanitizer Low-Level Vacuum Switch
11| 1| 12512.00| Sanitizer Alarm Buzzer, 120 Volts
12| 4| 40126.10| #10 x 3/4″ Sheet metal Screw
13| 4| 40127.00| Wall Anchors
14| 1| 00426.00| Y Hose Connector, 3/16”
Dish Racks
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 1 | 12960.01 | Dish Rack, Flat |
2 | 1 | 12960.03 | Dish Rack, Peg |
MODEL H-1X PARTS MANUAL Rev. 1.00 Buy Parts
CONTACT
- CMA DISHMACHINES
- 12700 KNOTT AVENUE
- GARDEN GROVE, CALIFORNIA 92841
- 800-854-6417
- FAX 714-895-2141
- www.cmadishmachines.com
References
- CMA Dishmachines – Commercial Glass & Warewashing Equipment
- CMA Dishmachines – Commercial Glass & Warewashing Equipment
- CMA Dishmachines - Parts and Supplies | USA-CLEAN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>