natec FELIMARE Wireless Keyboard User Manual
- June 9, 2024
- natec
Table of Contents
natec FELIMARE Wireless Keyboard
INSTALATION
PAIRING A NEW DEVICE WITH KEYBOARD IN BLUETOOTH MODE
- Turn on your computer or other compatible device.
- Turn on Bluetooth in the device you want to pair with the keyboard.
- Hold down FN + BT1 or BT2 buttons for 3 seconds to select Bluetooth mode.
- Flashing of the LED diode will notify of entering the pairing mode.
- Select Natec Felimare from the list on your device.
- After successful pairing the LED diode on the keyboard will stop flashing.
- The keyboard is ready for use.
CONNECTING THE KEYBOARD WITH THE PREVIOUSLY PAIRED DEVICE
- Turn on Bluetooth on your device that you have previously paired with the keyboard.
- Turn on the keyboard from hibernation by pressing any key.
- The keyboard will automatically connect with the device.
CONNECTION OF KEYBOARD VIA USB RECEIVER
- Turn on your computer or other compatible device.
- Connect included USB receiver to a free USB port on your device.
- The operating system will automatically install the required drivers.
- Press FN + 2.4G buttons to switch into connection mode 2.4 GHz, LED diode will flash once.
- The keyboard is ready for use.
REQUIREMENTS
- PC or compatible device with a USB port
- Bluetooth 4.0 or above
- Windows® 7/8/10/11, Linux, Android, iOS, Mac
SAFETY INFORMATION
- Recommended size of device for phone/tablet stand is up to 10”. A larger device may tilt the keyboard. Manufacturer is not responsible for damage caused by misuse.
- Use as intended, improper usage may break the device.
- Non-authorized repairs or disassembly voids the warranty and may damage the product.
- Dropping or hitting the device may lead to device being damaged, scratched or flawed in other way.
- Do not use the product in low and high temperatures, strong magnetic fields and damp or dusty surroundings.
INSERTING / REMOVING BATTERY
SELECTING THE OPERATING SYSTEM MODE
The keyboard allows to adjust the functions of the keys for individual
operating systems.
Press FN + Win | iOS | Android | Mac to select the operating system mode
.
CONNECTION MODE CHANGE
To change appropriate connection mode press the keys FN + BT1 | BT2 | 2.4G
.
TROUBLESHOOTING
If you have trouble connecting the keyboard to the USB receiver, perform the pairing procedure.
- Disconnect the USB receiver.
- Reconnect the USB receiver.
- Hold down Fn + 2.4G buttons for about 3 seconds till flashing of LED light.
- The keyboard will pair automatically with the USB receiver.
Note:
- The device is equipped with intelligent technology for energy management and will enter the hibernation mode after few minutes of not using it. Press any button to turn on the keyboard from the hibernation mode.
- Flashing of LED indicator will inform you about low battery level.
- Frequency band: 2402 Mhz – 2480 Mhz
- Maximum radio-frequency power: -4 dBm
WARRANTY
2 years limited manufacturer warranty
GENERAL
- The safe product, conforming to the EU requirements.
- The product is made in accordance with RoHS European standard.
- The WEEE symbol (the crossed-out wheeled bin) using indicates that this product in not home waste. Appropriate waste management aids in avoiding consequences which are harmful for people and environment and result from dangerous materials used in the device, as well as improper storage and processing. Segregated household waste collection aids recycle materials and components of which the device was made. In order to get detailed information about recycling this product please contact your retailer or a local authority.
- Hereby, IMPAKT S.A. declares that that the radio equipment type NKL-1973 is in compliance with Directives 2014/53/EU, 2011/65/EU and 2015/863/EU. The full text of the EU declaration of conformity is available via the product tab at www.impakt-com.pl.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>