HITACHI CV-SH18E Vacuum Cleaner Instruction Manual
- June 7, 2024
- Hitachi
Table of Contents
CV-SH18E Vacuum Cleaner
Instruction Manual
Vacuum Cleaner
Model /
CV-SH18E
Contents /
Before use /
Operational safety precautions…………………….. 2
Accessories and preparation before use ………. 5
How to use /
How to operate…………………………………………….. 7
When Finished cleaning /
Maintenance………………………………………………… 10
Head service office of Hitachi Sales (Thailand), Ltd.
No. 333, 333/1-8 Moo 13 Bangna-Trad Road km. 7, Bangkaew, Bangplee,
Samutprakarn 10540 Tel. +66 2335 5455 Fax. +66 2316 1128
()
333, 333/1-8 13 – . 7 10540 0-2335-5455 0-2316-1128 2,290
Hitachi Sales (Thailand), Ltd.
No. 333, 333/1-8 Moo 13 Bangna-Trad Road km. 7, Bangkaew, Bangplee,
Samutprakarn 10540 Tel. +66 2335 5455 Fax. +66 2316 1126
()
333, 333/1-8 13 – . 7 10540 0-2335-5455 0-2316-1126
Web Site : http://www.hitachi-th.com E-mail : hitachi@hitachi-th.com
3-135861-1
Thank you very much for purchasing the Hitachi Vacuum cleaning. Before usage, please read the user’s guide carefully for the correct usage.
For household use only
Operational safety precautions
In order to prevent personal injury or damage to the property of the user or
other persons, please read and understand (the operational safety precautions)
thoroughly and follow them correctly.
( )
WARNING
This box illustrates actions which
may cause serious injury or death.
Meaning of the Symbols
Denotes a warning or precaution
CAUTION
This box illustrates actions which
may cause injury or damage to
property.
Denotes an action which you shouldn’t do (prohibited)
()
Denotes an action which must always be done (instruction)
()
WARNING /
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
()
Do not operate when the cable is torn or damaged
While rolling the cable up, hold the plug, as it may flick up causing personal injury.
Wipe the plug terminals with a dry cloth regularly in order to eliminate dust.
Always remove the plug from the socket prior to dusting and cleaning and refrain from removing the plug with wet hands.
Do not disassemble, repair or modify the vacuum cleaner unless you are a professional technician, as this may result in damage to the unit and personal injury.
Use with 220-240V AC, 10A upwards.
220-240V 10
2
Children should be supervised to ensure that they
do not play with the appliance.
Model
Rated voltage
Rated frequency
Input power (IEC)
Input power (MAX.)
Dust filter
Dust capacity
Cord length
Net Weight (kg)
Dimension (mm) L x W x H
Rug-Floor Nozzle
Cleaning Tools
Extension Pipe
Accessories
Specifications
CV-SH18E 220 – 240V 50 – 60 Hz 1100 – 1400W 1300 – 1600W Dust case
1.6 L 5 m 4.4 kg 385 mm x 282 mm x 226 mm 2 Step Nozzle Head Extension Pipe
(Plastic) Crevice Nozzle / Dusting Brush
(.) (.) x x
CV-SH18E
220 – 240V
50 – 60 Hz
1100 – 1400W
1300 – 1600W
1.6 5 4.4 . 385 . x 282 . x 226 . 2 /
15
8 How to Clean the Vacuum Cleaner Body /
· Wipe with a soft cloth soaked with water.
·
CAUTION /
· Do not wash the cleaner with benzene, thinner and detergent, it may cause
color change and transformation.
· ,
14
WARNING /
Do not use the unit to vacuum kerosene, benzene, flammable gas or cigarette
butts.
, , ,
Using the unit outdoors or on wet surfaces may result in electric shock.
If the power supply cord is damaged, it must only be replaced by a repair shop appointed by the manufacturer or its service agents in order to avoid a hazard.
Always remove the plug prior to carrying out repairs.
Only use Hitachi carbon brushes.
Keep hair, loose clothing, fingers, and all parts of
the body away from openings and moving parts.
Failure to do so could result in electrical shock or
personal injury.
CAUTION /
Always remove the plug after use.
Do not rinse the vacuum cleaner with
water, as this may damage the unit.
To remove the plug, pull the plug,
not the cable.
Do not use the unit to vacuum water or dump areas, as this may damage the unit.
Do not plug the vacuum cleaner in the
loose outlet as it may melt the plug.
Airflow from the ventilation duct may result in personal injury if contract is made with the body for long periods.
3
CAUTION /
Do not use in close proximity to flammable materials (benzene, thinner), as
this may result in fire.
(, )
Do not expose your body to the air
released from the exhaust for long
periods of time. Doing so may cause
burns.
When transporting the vacuum cleaner, do not lift the unit using the vacuum hose, as this may result in the hose becoming torn.
Do not allow your children to play with the vacuum cleaner.
Do not vacuum the following types of material: water or liquids, desiccant, large quantities of sand or powder, long rope, glass and needles, as this may result in damage to the unit.
Do not use the cleaner to pick up wet dirt, and do not use the cleaner in a wet and moist place as moisture will damage the motor and other mechanical parts.
Pull the cord in parallel to the ground. If pulled up, the cord may be damaged due to friction with the cleaner. Doing so may cause electrical shock or flame.
Do not cover the ventilation outlets, as this may result in the unit become deformed and may cause fire due to excessive heat.
Do not violently pull the cord, it may be
damaged and cause electrical shock or
flame.
· This product complies with standards according to the safety regulations of
IEC60335-1 and IEC60335-2-2
· IEC60335-1 IEC60335-2-2
4
6 Clean the dust case ass’y / · Take out the dust case ass’y from the cyclone
room cap and wash the net filter and paper filter by using a brush with water.
After washing, let the filters dry up in the shade. ·
WARNING /
- The cleaner should be unplugged from the mains when not in use. 2) Be sure to set the dust case and each filter, and operate the cleaner. 3) Install the dust case to original position firmly. 4) Set the dust case not to make any gap between the lid of the dust case and cleaner body.
-
-
7 How to remove the motor protection filter /
1 · Open the dust cover. Remove the filter. Rinse the filter with water and hang in the shade to dry. ·
Filter
2 · Rinse the filter with water and wash by hand gently. ·
Filter
3 · Insert the dried filter in the same position. ·
CAUTION /
· Do not wash the filter by washing powder, bleach, benzene and alcohol. It’s
may caused of damage and deteriorate to filter.
· Do not wash the filter by washing machine and do not dried it by hair dryer.
· ·
13
4 Filter cleaning /
1 · Move the dust removal several times more. ·
2 · Put the dust case into large-sized plastic bag and push the open button of
the dust case to release dust into provided
plastic bag.
·
Open button of the dust case
3 · Clean the gap of paper filter with the brush or water. ·
How to remove the paper filter from net filter
4 · Fix the dust case cover to the body. Check that the rubber packing is
attached to dust case firmly.
·
WARNING /
· After washing, let the filters dry up in the shade before use.
·
5 How to clean cyclone cylinder filter /
1 · Turn the cyclone cylinder filter to “Open” and pull out. · “Open”
Open / Close /
Claw /
2 · Clean the cyclone cylinder filter with the brush or water. ·
WARNING /
· After washing, let the cyclone cylinder filter dry up in the shade before
use.
·
12
Accessories and preparation before use
Crevice nozzle
Extension pipe
Curved joint pipe
Cord rewind pedal
On/Off switch
/
Power cord
Flexible crush proof hose
Joint pipe
Hose inlet
Dust case cover
Rug and floor nozzle
· For dust removal and filter cleaning,
refer to page 11-12.
Dust case
· 11-12
Power plug
Rug and floor nozzle
Accessories /
Extension pipe
Flexible crush proof hose
Curved joint pipe
Joint Pipe
Dusting Brush
Crevice nozzle
Filter cleaning brush
5
Accessories and preparation before use
1 How to Assemble the Hose / · The hose and joint pipe are packed
individually. To put them together, insert the handle into the hose until the
claws of the stopper ring click into the holes. ·
How to assemble Seal ring and Stopper ring
Seal ring Stopper Ring
Holes Claws
2 How to attach the hose to the cleaner /
· Insert the joint pipe into the hose inlet of the cleaner. · When you remove
the hose from the cleaner, pull the joint pipe
while pressing the button.
·
Hose inlet
·
Joint pipe
Click
Button
Hose
3 1 How to connect the curved joint pipe to the extension pipe
Twist tightly
Extension pipe
Curved joint pipe
2
How to connect the extension pipe
Extension pipe
Twist tightly
41
How to assemble nozzle
2
How to store the accessories
Twist tightly
Extension pipe
· Fit the crevice nozzle on the curved joint pipe.
· When you remove the crevice nozzle, pull the
dusting brush and the crevice nozzle toward the
direction of the arrow.
· ·
Rug and floor nozzle
6
Curved joint pipe
Hook
Crevice nozzle
3 Dust removal /
1 · Move the dust removal several times more.
·
2 · Put the dust case into large-sized plastic bag and push the open button of
the dust case to release dust into provided plastic bag. ·
Open button of the dust case
3 · Remove dust on the net filter with brush. ·
4 · Fix the dust case cover to the body. Check that the rubber packing is
attached to dust case firmly.
·
Net filter
DIRECTION /
Every time you remove dust from the dust case, also clean the filter. For more
details, see page 12.
12
CAUTION /
· For those who allergic to dust, wearing gloves and mask while releasing the
dust is necessary. In order to prevent dust allergy.
·
11
Maintenance
1 Filter maintenance sign / · When the orange indicator appears in the filter maintenance window continuously, remove dust in the dust case. · Check the dust indicator by lifting suction tool from the floor and removing the crevice nozzle when it is used. · ·
Filter indicator window
CAUTION /
· When the orange sign appears in the window continuously, do not use the
vacuum cleaner without dust removal. If the cleaner is used in such a
condition as the orange sign appears in the window, air to the motor will be
reduced and the motor will eventually burn out.
·
2 How to empty dust case /
1 · Switch off the power supply and disconnect the power cord.
· Open the dust cover until it is in a standing position.
· ·
Dust case cover
2 · Open the lock button of dust case. ·
Do not press this button while removing the dust case.
How to Operate
1 Insert the mains plug into a socket /
CAUTION /
· The cleaner should be unplugged from the mains when not in use.
·
2 On/Off switch / / · Turn the cleaner on or off by pushing the on/off switch.
· /
Socket
On/Off switch
/
3 How to operate the rug and floor nozzle / · The nozzle is fitted with a brush at the back which can either be used in the “withdrawn” or “projected” position. These positions are operated by the pedal on the tool marked ” ” (Carpet) and ” ” (Floor),. For cleaning rug or carpet, keep the brush in its “withdrawn” position, i.e., with the pedal marked ” ” pressed down with your toe. If you feel the tool is heavy to slide on the carpet, please reduce the suction power by adjusting the suction control. · “” “” ” ” () ” ” () “” ” ”
3 · Pull up the dust case. ·
CAUTION /
· Do not press open button while pulling up the dust case (Dust may drop).
· ()
10
Brush “withdrawn” position
Brush “projected” position
CAUTION /
· When setting it to “projected” position, do not use the vacuum cleaner to
clean carpets. (It requires more force.)
· To clean the wood surface, do not use excessive force. Doing so may scratch
the wood.
· () ·
7
4 How to control suction power with curved joint pipe /
· Suction pressure is reduced by moving the adjustment ring on the
curved joint pipe to expose a hole.
· The more hole area exposed the lower the suction.
Low suction pressure is recommended for cleaning curtains, blinds,
delicate fabrics etc.
· To decrease suction power, turn the adjustment ring so that the air
could pass through the hole.
·
·
Adjustment ring
·
5 Automatic cord rewind / · The power cord is stored neatly inside the cleaner
using an
automatic cord rewind.
When cleaning is completed, unplug the mains and press the
cord rewind pedal.
The cord will automatically rewind.
·
Cord rewind pedal
DIRECTION /
If the cord does not fully rewind, pull out in short length and press the
pedal again. For smooth rewinding, turn the cord inlet toward the same
direction as the cord pulled out.
To use Accessories /
6 Crevice Nozzle
1 For cleaning at :
· Corners on stairs · Corners in closet · Gap between furniture · Gaps in sofa
· Corners on floor · Slits in sashes
: · · · · · · ,
2 · Use the crevice nozzle by pushing into the extension pipe or Curved joint
pipe. ·
8
Push
Extension pipe
Curved joint pipe
7 Clean-up technique /
1 · Crevice nozzle can be used for cleaning the hard-to-reach parts of the
sofa. ·
2 · Crevice nozzle can be used for cleaning the corner of your house. ·
Dusting brush can be turned
to adjust the angle.
Dusting brush can be used for
cleaning the bookshelf.
CAUTION /
· Do not push a soft surface like piano to avoid scratches on it.
·
8 Blower function / · Insert the joint pipe of the hose into the blower
outlet. · When you remove the hose, pull the joint pipe while pressing the
button. · ·
9 To store vacuum cleaner / · Hose, Extension pipe, and rug & floor nozzle can
be stored in assembled condition at two positions of the cleaner by using
nozzle hook. This combination allows you a space saving storage. 1. Place the
cleaner upright. 2. Slide the nozzle hook of the rug and floor tool into the
hook supporter at the lower rear of the cleaner. 3. Coil the hose around the
extension pipe to make it compact and stable. Notes · Do not carry the cleaner
in the hose stand storage position. · Do not store the cleaner with the hose
near a stove or a warm place. It may be damaged due to excessive heat.
· ,
1. 2.
3. · ·
Button
Blower outlet Joint pipe
Nozzle hook
Extension pipe
Hook supporter
Hose
9
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>