FORTIN 86871 Toyota Corolla Remote Starters Installation Guide

REV.: 20211110
GUIDE # 86871
ADDENDUM – SUGGESTED WIRING CONFIGURATION
REGULAR INSTALLATION

86871 Toyota Corolla Remote Starters

VEHICLE
YEARS

the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
---|---|---|---|---
MANUFACTURED AFTER2019

Program bypass option:

IF THE VEHICLE IS NOT EQUIPPED
WITH FUNCTIONAL HOOD PIN:

NOTES

NO KEY TAKEOVER
The module will shut down the vehicle as soon as the drivers door is opened.
The vehicles OEM remote and SmartKey are still operable during remote start.
Parts required** (Not included)
1X 7.5 Amp. Fuse
1X Diode

MANDATORY INSTALL

* HOOD PIN HOOD STATUS: THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

A11

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

AUTOMATIC TRANSMISSION WIRING CONNECTION

MANUAL TRANSMISSION WIRING CONNECTION

DCRYPTOR PROGRAMMING PROCEDURE

Parts required (not included)

| FLASH LINK UPDATER,
---|---
| FLASH LINK MANAGER SOFTWARE | PROGRAMME
| Microsoft Windows Computer with Internet connection

OR

| FLASH LINK MOBILE
---|---
| FLASH LINK MOBILE APP
| Smartphone Android or iOS with Internet connection (Internet provider charges may apply)

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.

Press and hold the programming button: Connect the 4-PIN Data-link connector.
↳ The BLUE, RED, YELLOW and BLUE & RED LEDs will alternatively illuminate.

Release the programming button when the LED is BLUE.
If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.Insert the required remaining connectors.Do not press the brake pedal.
Press the Push-to-Start button twice to turn on the ignition.
↳ Wait for the BLUE LED to flash rapidly and constantly.

KEY BYPASS PROGRAMMING PROCEDURE 2/2 Disconnect all the connectors and after the Data-Link (4-pins) connector.

Use the tool:
FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
*Parts required (not included)

AFTER DCRYPTOR PROGRAMMING COMPLETED
Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector.

The module is now programmed.
REMOTE STARTER
Test the remote starter. Remote start the vehicle.

REMOTE STARTER FUNCTIONALITY

| All doors must be closed.
---|---
START| Remote start the vehicle.
| Unlock the doors with either:
• The OEM remote
• Or the proximity remote
| The module will shut down the vehicle as soon as the drivers door is opened.
| Enter the vehicle with the Smart-Key.
| Press the brake pedal.
| Press the Push-to-Start button to start the vehicle.
| The vehicle can now be put in to gear and driven.

| MODEL: EVO-ALL
DATE:02/2019
FORTIN.CA| ****
---|---|---

SN: 000000 00000

** MADE IN CANADA
© 2018 ALL RIGHTS RESERVED
Notice:** Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the  replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Such: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>