FORTIN 69481 Toyota Camry 2019 Stand Alone Remote Starter Installation Guide

STAND ALONE INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION

VEHICLE
YEARS
TOYOTA Camry
Push-to-Start – AT 2018-2019

69481 Toyota Camry 2019 Stand Alone Remote Starter

ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES.

Vehicle functions supported in this diagram (functional if equipped)

• Immobilizer bypass
• Lock
• Unlock
• Arm
• Disarm
• Parking Lights
• Trunk Open
• Tachometer
• Door Status
• Trunk Status
• Hood Status*
• Hand-Brake Status
• Foot-Brake Status
• OEM Remote monitoring**

COMPATIBLE MODULE
REQUIRED:| QR CODE ON THE LABEL
---|---
MANUFACTURED AFTER: 2019

FIRMWARE VERSION 79.[66] MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.

Program bypass option:

NOTES

**The vehicles OEM remote and SmartKey are still operable during remote start.
NO KEY TAKEOVER**

Parts required (Not included)
1X Fuse

MANDATORY INSTALL

* HOOD PIN

HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

A11|
---|---

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

PARTS REQUIRED (NOT INCLUDED)

| FLASH LINK UPDATER,
---|---
| FLASH LINK MANAGER
SOFTWARE | PROGRAMME
| Microsoft Windows Computer with Internet connection

OR

| FLASH LINK MOBILE
---|---
|   FLASH LINK MOBILE APP
| Smartphone AndroId or iOS with Internet connection (provider charges may apply).

MANDATORY
HOOD PIN REMOTE START SAFETY OVERRIDE SWITCH

Part #: RSPB available, Sold separately.

Notice: the installation of safety elements are mandatory.
The hood pin and the valet switch are essential security elements and must be installed.

STAND ALONE CONFIGURATIO

Program bypass option
OEM Remote Stand Alone Remote Starter:

Program bypass option with oem remote:

Program bypass option with RF KIT antenna:

and select RF Kit

REMOTE STARTER FUNCTIONNALITY

| |
---|---|---
All doors must be closed.| Press the OEM remote’s Lock button 3x to
remote-start (or remote-stop) the vehicle.| The vehicle will START.

REMOTE STARTER DIAGNOSTICS

MODULE RED LED

before start
x5 flash :| Hood Open

REMOTE STARTER WARNING CARD

CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE: or use the package RSPB, Sold separately.

WARNING
REMOTE STARTER
THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE DASHBOARD BEFORE WORKING ON THE VEHICLE.

DESCRIPTION

AUTOMATIC TRANSMISSION WIRING CONNECTION

DCRYPTOR PROGRAMMING PROCEDURE

Parts required (not included)

| FLASH LINK UPDATER,
---|---
| FLASH LINK MANAGER
SOFTWARE | PROGRAMME
| Microsoft Windows Computer with Internet connection

OR

| FLASH LINK MOBILE
---|---
|   FLASH LINK MOBILE APP
| Smartphone AndroId or iOS with Internet connection (provider charges may apply).

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.

Press and hold the programming button: Connect the 4-PIN Data-link connector.
The BLUE, RED, YELLOW and BLUE & RED LEDs will alternatively illuminate.

Release the programming button when the LED is BLUE.
If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.

Insert the required remaining connectors.

Do not press the brake pedal.
Press the Push-to-Start button twice to turn on the ignition.
Wait for the BLUE LED to flash rapidly and constantly.

KEY BYPASS PROGRAMMING PROCEDURE 2/2

Disconnect all the connectors and after the Data-Link (4-pins) connector.

Use the tool:
FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
*Parts required (not included)

AFTER DCRYPTOR PROGRAMMING COMPLETED
Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector.

The module is now programmed.

REMOTE STARTER / ALARM VERIFICATION PROCEDURE
Test the remote starter. Remote start the vehicle.

OPTIONAL RF-KIT PROGRAMMING

PROGRAM BYPASS OPTION

Program bypass option:

H2| ☑Supported RF-KITS enable
☑ H2 Fortin 2
---|---

OPTIONAL FORTIN RF KIT SERIES 4 OR SERIES 9 PROGRAMMING

REMOTE STARTER FUNCTIONALITY

| Remote start the vehicle.
All doors must be closed.
---|---
| Unlock the doors with either:
• The OEM remote
• The remote-starter remote
• Or the proximity remote
| The module will shut down the vehicle as soon as the drivers door is opened.
| Enter the vehicle with the Smart-Key.
| Press the brake pedal.
| Press the Push-to-Start button to start the vehicle.
| The vehicle can now be put in to gear and driven.

Module label

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case
is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797

ADDENDUM GUIDE

www.fortinbypass.com
WEB UPDATE

This guide may change without notice. See www.fortin.ca for latest version.
REV.: 20211129
GUIDE # 69481

References

• The domain name off.la is for sale
• wah damn solid

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>