FORTIN 103531 Subaru WRX 2021 Push To Start Remote Starters And Alarm Systems Installation Guide

FORTIN 103531 Subaru WRX 2021 Push To Start Remote Starters And Alarm Systems Installation Guide

Vehicle functions supported in this diagram (functional if equipped)

Immobilizer bypass

• Lock
• Unlock
• Arm
• Disarm
• Trunk (open)
• Parking Lights
• Tachometer
• Door Status
• Trunk Status
• Hood Status*
• Foot-Brake Status
• OEM Remote monitoring**

BYPASS FIRMWARE VERSION VERSION LOGICIELLE CONTOURNEMENT

84.[11] MINIMUM

To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately

Program bypass option:

Program bypass option (If equiped with OEM alarm):

IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:

Program remote starter option for R.S. OEM REMOTE STAND ALONE:

NOTES

**OEM Remote monitoring
The vehicles OEM remote will remain functional when the vehicle is running, however, the intelligent access key will not unlock the doors when the vehicle is running.

MANDATORY INSTALL

*
HOOD NON PIN**
HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF

SECURITY STICKER

WARNING

Included

Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

Parts required (Not included)

WIRE TO WIRE DIAGRAM

THARNESS DIAGRAM

THARNESS| AUTOMATIC TRANSMISSION| |
---|---|---|---
MANUAL TRANSMISSION| 1x THAR-ONE-SUB2| 1x THAR-ONE-SUB

DESCRIPTION

AUTOMATIC TRANSMISSION WIRING CONNECTION

DESCRIPTION

THAR-ONE-SUB

DCRYPTOR PROGRAMMING PROCEDURE

Parts required (not included)

1x FLASH LINK UPDATER,
1x FLASH LINK MANAGER
1x Microsoft Windows Computer with Internet connection

1x FLASH LINK MOBILE
1x FLASH LINK MOBILE APP SOFTWARE
1x Smartphone Android or iOS with Internet connection (Internet provider charges may apply)

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE

Press and hold the programming button: Connect the 6-PIN Main harness (White connector).

The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.

Release the programming button when the LED’s are BLUE & RED.

If the LED’s are not solid BLUE and RED disconnect the 6-Pin connector (Main- Harness) and go back to step 1.

Insert the required remaining connectors.

Press and release the programming button six time (6x).

The RED and BLUE LED will flash 5 times each second.

Start the engine :
Press the brake pedal.
Press the Push-to-Start button to start the engine.

• The RED LED will flash rapidly 10x times.
  Key bypass programmed.

• Wait for the BLUE LED will flash rapidly.

• Wait for the YELLOW and RED LED will alternate

Stop the engine:
Press the Push-to-Start button once to turn off the ignition.

KEY BYPASS PROGRAMMING PROCEDURE 2/2 |

Disconnect all connectors and after the 6-Pin (Main-Harness) or the 4-Pin Data-link connector.

**FLASH LINK UPDATER***

**FLASH LINK MANAGER***

Microsoft Windows Computer with Internet connection*

Use the tool:
FLASH LINK UPDATER or FLASH LINK MOBILE
to visit the DC ryptor menu

OR

VEHICLE’S OBDII CONNECTOR

**FLASH LINK MOBILE***

Smartphone* (Internet provider charges may apply)

Use the tool:
FLASH LINK UPDATER or
FLASH LINK MOBILE
to visit the DCryptor menu.

*Parts required (not included)

AFTER DCRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 6-Pin (MainHarness) or the 4-pins (Data-Link) connector and after all the remaining connector.

The module is now programmed

REMOTE STARTER / ALARM VERIFICATION PROCEDURE

Test the remote starter. Remote start the vehicle.

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

All doors must be closed.

Remote start the vehicle.

Unlock the doors with the remote-starter remote.

Enter the vehicle with the SMART-KEY.

DO NOT PRESS THE BRAKE PEDAL.

Press and release the Push-to-Start button once.

Wait for the orange led on the Push-to-Start button to fiash once.

Press the brake pedal. The vehicle can now be put in to gear and driven.

If the Smart-Key is not detected the vehicle will shut down.

Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT
Tél: 514-255-HELP (4357) 1-877-336-7797

ADDENDUM GUIDE

www.fortinbypass.com

WEB UPDATE | MISE À JOUR INTERNET

References

• Home | Marcelino d.o.o.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>