maquira 403043 Max Seal Matted Instructions
- June 13, 2024
- maquira
Table of Contents
maquira 403043 Max Seal Matted
Product Information:
The product is a multi-functional blender designed for blending, pureeing, and
crushing various ingredients. It has a powerful motor that operates at
different speed settings to achieve desired blending results. The blender
comes with a detachable stainless steel blade that is sharp and durable for
efficient blending. It also features a large capacity jar made of BPA-free
plastic, which is safe for food preparation. The blender has a user-friendly
control panel with easy-to-use buttons for selecting different functions and
adjusting the speed settings. It also has a safety lock system to ensure safe
operation.
Product Usage Instructions:
- Before using the blender for the first time, clean the jar, lid, and blade assembly with warm soapy water and rinse thoroughly.
- Place the jar on the base unit and ensure it is securely locked into place.
- Add the desired ingredients into the jar. Make sure not to exceed the maximum capacity indicated on the jar.
- Attach the blade assembly onto the jar by aligning the arrows on both parts and twisting it clockwise until it locks into place.
- Close the lid tightly by aligning the arrows on the lid and jar, then twist it clockwise until it locks into place.
- Plug in the blender and ensure it is properly connected to a power source.
- Press the power button to turn on the blender.
- Use the speed control buttons to adjust the blending speed according to your preference.
- Select the desired function button (blending, pureeing, or crushing) to activate the corresponding blending mode.
- For safety, keep hands and utensils away from the jar while the blender is in operation.
- After blending, press the power button to turn off the blender. 12. Carefully remove the lid and detach the blade assembly from the jar by twisting it counterclockwise.
- Pour out the blended ingredients from the jar and serve as desired.
- Clean the jar, lid, and blade assembly after each use by handwashing them with warm soapy water. Avoid immersing the base unit in water.
Presentations : 1 syringe with 2 g and 5 tips.
Indication
Tinted Max Seal is a light-cured dental sealant used on pits and fissures of primary and permanent posterior teeth and complex anatomy in preventing caries.
Composition: Bis-GMA, UDMA, HDDMA, sodium fluoride, calcium fluoride, BHT, camphorquinone, co-initiators and colloidal silicon dioxide.
How to use
- Check for the presence of occlusal contacts in the regions of pits and fissures.
- Perform absolute or relative isolation, ensuring there is no fluid contamination of the enamel to be treated.
- Perform the acid conditioning with 37% phosphoric acid (Maquira Acid Gel), for 30 seconds. Wash with plenty of water and then dry the surface.
- The conditioning site will be opaque and whitish. In case of contamination by fluids repeat the acid conditioning procedure.
- Apply the sealant to the pits and fissures, preserving the sites of occlusal contact.
- Light cure the region for 20 seconds. Light curing with power above 400 mW/cm2 is recommended. Less powerful equipment will need more time for curing.
- Recheck the occlusal contacts.
Precautions:
Periodically verify the integrity of the material. If the material is totally
removed, proceed as with the first application. If part of the material is
removed, check the adhesion with an explorer on the remaining material, clean
the site, perform acid etching, and apply the sealant only to the uncovered
area.
Precautions:
- For exclusive use by dentists;
- Close the syringe immediately after use;
- Products such as eugenol or clove oil inhibit polymerization;
- Do not use the product if the validity has expired;
- Keep out of reach of children;
- Use safety goggles when handling the photopolymerizer.
Transport and Storage
Always maintain the packaging well closed straight after use. It is advisable to store the product in a dry place, protected from the light and at temperatures between 5 and 30 °C. Do not store near products with an eugenol base.
Symbology
- Consult the safety, danger and precautions information.
- Keep dry
- Read the instructions of use
- Keep sheltered from sunlight
- Papel reciclable
- Temperature limite
Fabricado por I Manufactured by: MAQUIRA INDUSTRIA DE PRODUTOS
ODONTOLÓGICOS S.A.
CNPJ : 05.823.205/0001-90
Av. Melvim Jones, 773
Parque Industrial Bandeirantes:87070 030 Maringá – PR Farm. Responsável
Responsable Farm.: Kellen Dib de Campos
CRF/PR 15.807