FORTIN 92541 Volkswagen Atlas 2018 Remote Starters And Alarm Systems Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
- 92541 Volkswagen Atlas 2018 Remote Starters And Alarm Systems
- PARTS REQUIRED
- PARTS REQUIRED (NOT INCLUDED)
- STAND ALONE CONFIGURATIO
- REMOTE STARTER FUNCTIONNALITY
- REMOTE STARTER WARNING CARD
- Photo & Location
- WIRE-TO-WIRE AUTOMATIC TRANSMISSION WIRING CONNECTION
- PROGRAMMING PROCEDURE
- OPTIONAL RF-KIT PROGRAMMING
- REMOTE STARTER FUNCTIONALITY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
INSTALLATION WITH KEY REQUIRED
ADDENDUM – SUGGESTED WIRING CONFIGURATION
VEHICLE YEARS
VOLKSWAGEN
Atlas 2018
92541 Volkswagen Atlas 2018 Remote Starters And Alarm Systems
ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES.
Vehicle functions supported in this diagram (functional if equipped)
- Key Control
- Lock
- Unlock
- Arm
- Disarm
- Tachometer
- Trunk – open
- Door Status
- Trunk Status
- Hood Status *
- Hand-Brake Status
- Foot-Brake Status
- OEM Remote monitoring
FIRMWARE VERSION VERSION LOGICIELLE 61.[12] VW MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or
FLASH LINK MOBILE tool, sold separately.
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:
A11 | Hood trigger (Output Status). |
---|
Program bypass option:
UNIT OPTION | DESCRIPTION |
---|---|
C1 | OEM Remote status (Lock/Unlock) monitoring |
Program bypass option (If equiped with OEM alarm):
UNIT OPTION | DESCRIPTION |
---|---|
D2 | Unlock before / Lock after (Disarm OEM alarm) |
NOTES
1 KEY REQUIRED FOR THE INSTALLATION
The vehicle’s OEM remote will operate while the engine is running.
MANDATORY INSTALL
* HOOD PIN
HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
A11|
---|---
Notice: the installation of safety elements are mandatory. The hood pin
is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION
CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
PARTS REQUIRED
Parts required (Not included)
WIRE TO WIRE DIAGRAM
AUTOMATIC TRANSMISSION
TRANSMISSION AUTOMATIQUE| 1x Vehicle key
1x 7.5 Amp. fuse
4x Diodes
---|---
THARNESS DIAGRAM
THARNESS THAR-VW6| AUTOMATIC TRANSMISSION
TRANSMISSION AUTOMATIQUE| 1x Vehicle key
1x THAR-VW6
---|---|---
THARNESS THAR-VW2| AUTOMATIC TRANSMISSION
TRANSMISSION AUTOMATIQUE| 1x Vehicle key
1x THAR-VW2
PARTS REQUIRED (NOT INCLUDED)
| FLASH LINK UPDATER,
---|---
| FLASH LINK MANAGER SOFTWARE
| Microsoft Windows Computer with Internet connection
OR
| FLASH LINK MOBILE
---|---
| FLASH LINK MOBILE APP
| Smartphone AndroId or iOS with Internet connection (provider charges may
apply).
MANDATORY
HOOD PIN REMOTE START SAFETY OVERRIDE SWITCH
Part #: RSPB available, Sold separately.
Notice: the installation of safety elements are mandatory.
The hood pin and the valet switch are essential security elements and must be
installed.
STAND ALONE CONFIGURATIO
Program bypass option
OEM Remote Stand Alone Remote Starter:
D1.1 | By default, LOCK, LOCK, LOCK |
---|
Program bypass option with oem remote:
UNIT OPTION | DESCRIPTION |
---|---|
C1 | OEM Remote Monitoring |
Program bypass option with RF KIT antenna:
UNIT OPTION | DESCRIPTION |
---|---|
H1 to H6 | Supported RF Kits |
and select RF Kit
REMOTE STARTER FUNCTIONNALITY
| |
---|---|---
All doors must be closed.| Press the OEM remote’s Lock Unlock Lock buttons to
remote-start (or remote-stop) the vehicle.| The vehicle will START.
REMOTE STARTER DIAGNOSTICS
MODULE RED LED
x2 flash : | Brake ON |
---|---|
x3 flash : | No tach |
x4 flash : | Ignition |
before start
x5 flash :| Hood Open
REMOTE STARTER WARNING CARD
CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE: or use the package RSPB, Sold separately.
WARNING
REMOTE STARTER
THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM
REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH
LOCATED UNDER THE DASHBOARD BEFORE WORKING ON THE VEHICLE.
Photo & Location
WIRE-TO-WIRE AUTOMATIC TRANSMISSION WIRING CONNECTION
THAR-VW6 – AUTOMATIC TRANSMISSION WIRING CONNECTION
THAR-VW2 – AUTOMATIC TRANSMISSION WIRING CONNECTION
PROGRAMMING PROCEDURE
| Press and hold the
programming button: Connect the 4-PIN Data-link connector (Black connector).
The BLUE, RED, YELLOW and BLUE & RED LEDs will alternatively illuminate.
---|---
| Release the programming button
when the BLUE LED is ON.
If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go
back to step 1.
| Insert the required remaining
connectors.
| Turn the key to the Ignition ON/RUN position.
5. WITH T-HARNESS THAR-VW6
| Press and release the programming button once (1x).
| The BLUE LED will turn off.
Wait,
The BLUE LED will flash rapidly.
| Turn the key to the OFF
position.
The BLUE LED will turn off.
The module is now programmed.
OPTIONAL RF-KIT PROGRAMMING
PROGRAM BYPASS OPTION
Program bypass option:
H2| ☑Supported RF-KITS enable
☑ H2 Fortin 2
---|---
OPTIONAL FORTIN RF KIT SERIES 4 OR SERIES 9 PROGRAMMING
REMOTE STARTER FUNCTIONALITY
| |
---|---|---
All doors must be closed.| Remote start the vehicle.| Unlock the doors with
the remote-starter
remote or the OEM remote.
| |
Insert and Turn the key to the Ignition ON/RUN position.| Press
the brake pedal.| The vehicle can now be put in to gear and driven.
Module label
Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest firmware
and download the latest installation guide(s) prior to the installation of
this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit
before connecting to it. Only a computer safe logic probe or digital
multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no
liability or responsibility whatsoever pertaining to the accuracy or currency
of the information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualified technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE
This guide may change without notice. See
www.fortin.ca for latest version.
REV.: 20211221
Guide # 92541
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>