FORTIN 94691 Mazda B-Series 2001 Standard-Key Remote Starters and Alarm Systems Installation Guide

June 13, 2024
FORTIN

FORTIN 94691 Mazda B-Series 2001 Standard-Key Remote Starters and Alarm

Systems

FORTIN 94691 Mazda B-Series 2001 Standard-Key Remote Starters and Alarm
Systems

REGULAR INSTALLATION

ADDENDUM – SUGGESTED WIRING CONFIGURATION.FORTIN 94691 Mazda B-Series
2001 Standard-Key Remote Starters and Alarm Systems 1

Notice : the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
FORTIN 94691 Mazda B-Series 2001 Standard-Key Remote Starters and Alarm
Systems 2

WIRING CONNECTION

This guide may change without notice. See www.fortin.ca for latest version.

FORTIN 94691 Mazda B-Series 2001 Standard-Key Remote Starters and Alarm
Systems 3

PROGRAMMING PROCEDUREFORTIN 94691 Mazda B-Series 2001 Standard-Key
Remote Starters and Alarm Systems 4

The module is now programmed.
Use the remote of the remote starter or security system to test all of the supported features to ensure proper programming.

REMOTE STARTER FUNCTIONALITYFORTIN 94691 Mazda B-Series 2001 Standard-
Key Remote Starters and Alarm Systems 5

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our website on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer-safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
www.fortinbypass.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

FORTIN User Manuals

Related Manuals