FORTIN 101681 Volkswagen Beetle 2002 Standard-Key Remote Starters and Alarm Systems Instruction Manual
- June 13, 2024
- FORTIN
Table of Contents
FORTIN 101681 Volkswagen Beetle 2002 Standard-Key Remote Starters and
Alarm Systems
Product Information
Product Name: Volkswagen Beetle Remote Car Starter
Model Year Compatibility: 2002-2011
Firmware Version: 75.[40]
Parts Required (Not included):
- 1X Vehicle key
Mandatory Installation:
- Hood Pin Contact: The hood pin switch must be installed. If the vehicle can be remote started with the hood open, set function A11 to OFF.
- Notice: The installation of safety elements is mandatory. The hood pin is an essential security element and must be installed.
- This module must be installed by a qualified technician. A wrong connection can cause permanent damage to the vehicle.
Kessy Key:
- To complete the remote car starter installation, either use one of the existing keys or order a new valet key from Volkswagen (Part #: 2k0837219ABINF).
- The key provided by Volkswagen is customized for the vehicle’s VIN and can only be initialized on the new valet key first, and only after should all the remaining keys be reinitialized.
- Any keys that are not initialized during the programming procedure will no longer function.
Description
- Parking Lights harness
- Brake switch
- Foot Brake
- Driver door harness
- Trunk Release
- Tachometer
- Transponder wire
- Unlock/Lock
Data-Link:
- Direct connection is required for data-link.
Product Usage Instructions
- Ensure that the hood pin switch is installed. If the vehicle can be remote started with the hood open, set function A11 to OFF.
- If necessary, order a new valet key from Volkswagen (Part #: 2k0837219ABINF) or use one of the existing keys for remote car starter installation.
- Initialize the new valet key using a scan-tool provided by Volkswagen. The scan-tool must be used with the dealer to customize the key for the vehicle’s VIN.
- After initializing the new valet key, reinitialize all the remaining existing keys.
- Make the necessary connections according to the provided description, ensuring proper harness and connector usage.
- If a data-link connection is required, ensure a direct connection is made.
- Test the remote car starter functionality by following the instructions provided in the user manual.
NOTES : To complete the installation either use one of the existing keys or order a new valet key from Volkswagen, see next page for more information.
KEY CONTROL
KEY OR VALET KEY REQUIRED
To complete the installation either use one of the existing keys or order a
new valet key from Volkswagen, see next page for more information.
AUTOMATIC TRANSMISSION WIRING CONNECTION
PROGRAMMING PROCEDURE
Press and hold the programming button: Connect the 4-PIN Data-link harness
(Black connector).
The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.
Release the programming button when the LED is BLUE. If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.
Insert the required remaining connectors.
Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest fi rmware
and download the latest installation guide(s) prior to the installation of
this product.
WANING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever pertaining to the accuracy or currency of the
information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualifi ed technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT
PENDING
TECH SUPPORT
www.fortinbypass.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>