FORTIN 79391 2007 Mazda B-Series Regular Key Remote Starters and Alarm Systems Installation Guide

FORTIN 79391 2007 Mazda B-Series Regular Key Remote Starters and Alarm

Systems

Product Information

Product Name: Immobilizer Bypass Compatible
Vehicles: Mazda B-Series (2007-2010)
Firmware Version: 71.[44] Unit Option: A11 (Off)
Description: The Immobilizer Bypass is a device that allows for the bypassing of the vehicle’s immobilizer system, enabling easier remote starting and unlocking of the vehicle.

Product Usage Instructions

1. Mandatory Installation:
   • Hood Pin: The hood pin switch must be installed for proper functionality.
   • If the vehicle can be remote started with the hood open, set function A11 to Off.
2. Safety Precautions:
   • The installation of safety elements, such as the hood pin, is mandatory for proper operation and security.
   • This module must be installed by a qualified technician to avoid any permanent damage to the vehicle.
3. Wiring Connection:
   • Transponder Connector: Connect the device’s transponder connector to the vehicle’s transponder.
   • Brake Switch: Connect the device to the brake switch for proper operation.
   • Ignition Barrel: Connect the device to the ignition barrel for ignition and accessory functions.
   • Parking Lights Switch: Connect the device to the parking lights switch for control of the parking lights.
4. Flash Link Updater or Flash Link Mobile:
   • To add firmware versions and options, use the Flash Link Updater or FlashLink Mobile tool (sold separately). Please follow these instructions carefully to ensure proper installation and usage of the Immobilizer Bypass. plétées en moins de 5 secondes. Si non, débranchez tous les connecteurs et allez à l’étape 1.

Parts required (Not included)
1x  Fuse 10 AMp
1x Fuse

MANDATORY INSTALL
HOOD PIN
HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED
IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.

DESCRIPTION

WIRING CONNECTION

PROGRAM.1: 2 KEY PROGRAMMING PROCEDURE 1/2

Press and hold the programming button: Connect the 4-PIN Data-link harness (Black connector). The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.

Release the programming button when the LED is RED. If the LED is not solid RED disconnect the 4 Pin connector (Data-Link) and go back to step 1.

Insert the required remaining connectors.

Turn the first functional key to the Ignition ON/RUN position. Wait 3 seconds.

Turn the key to the OFF position. Remove the first key.

Turn the second functional key to the Ignition ON/RUN position. Wait 3 seconds.

Turn the key to the OFF position. Remove the second key.
CAUTION : The following step must be completed within 5 seconds.
Otherwise disconnect all connectors and go back to step 1.

Press and hold the programming button until the LED flashes once.  The RED LED will flash once (1x).

Release the programming button.

AUTOMATIC TRANSMISSION

Activate the remote starter.

MANUAL TRANSMISSION

Using a jumper wire, apply power (12v) to the vehicle’s ignition1.

The RED LED will flash rapidly ten (10) times. If the LED is solid RED disconnect the 4 Pin connector (Data-Link) and go back to step 1.

Manual transmission: Remove the jumper.
The module is now programmed. Use the remote of the remote starter or security system to test all of the supported features to ensure proper programming.

PROGRAM.2: DCRYPTOR PROGRAMMING PROCEDURE 1/2

Parts required (not included)
1x FLASH LINK UPDATER, 1x FLASH LINK MANAGER

SOFTWARE | PROGRAMME
Microsoft Windows Computer with Internet connection Ordinateur Microsoft Windows avec connection Internet
FLASH LINK MOBILE
FLASH LINK MOBILE APP
Smartphone Android or iOS with Internet connection
(Internet provider charges may apply)

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.

Press and hold Insert the programming button: the 4-Pin (Data-Link) connector. The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.

Release the programming button when the LED is RED.

Insert the required remaining connectors.

Press and release the programming button once (1x).
The RED LED will flash once. ON

Turn the Ignition to the ON/RUN position. WAIT the RED LED will turn OFF.  The YELLOW LED will turn on.

Turn the Ignition to the OFF position. WAIT the YELLOW LED will turn OFF.

Turn the Ignition to the ON/RUN position. The RED and YELLOW LEDs will alternate.

Turn the Ignition to the OFF position.

Disconnect all the connectors and after the Data-Link (4-pins) connector.

Microsoft Windows Computer with  Internet connection*

Use the tool:
FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.

Parts required (not included)

Smartphone*
(Internet provider charges may apply)

AFTER DCRYPTOR PROGRAMMING COMPLETED
Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector. The module is now programmed.
REMOTE STREMOTE STARTER / ARTER / ALARM  VERIFICATIONTION
Test the remote starter . Remote start the vehicle.

Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>