FORTIN 80791 Mazda MPV 2001 Standard-Key Remote Starters and Alarm Systems Installation Guide

FORTIN 80791 Mazda MPV 2001 Standard-Key Remote Starters and Alarm

Systems

Product Information

• Product Name: Immobilizer Bypass
• Compatible Vehicles: Mazda MPV 2000-2006
• Firmware Version: 71.[44]
• Description: The immobilizer bypass is a device that allows you to bypass the vehicle’s immobilizer system, enabling functions like lock, unlock, arm, disarm, parking lights, and foot brake.
• Parts Required (Not Included): 1X 1K Ohm Resistorode
• Mandatory Installation: The hood pin contact must be installed for proper functioning. If the vehicle can be remote started with the hood open, set function A11 to OFF.
• Important: The installation of safety elements,  such as the hood pin, is mandatory. This module should be installed by a qualified technician to avoid any damage to the vehicle.

Product Usage Instructions

1. Make sure you have the necessary parts, including the 1K Ohm Resistorode (not included).
2. If your vehicle is not equipped with a functional hood pin, program the bypass option by setting function A11 to OFF.
3. Connect the wiring as follows:
   • Connect the parking light harness to the (-) parking lights.
   • Connect the ignition harness to the (+)12V, (+)ignition, (+)starter, and (+)accessory.
   • Connect the foot brake to the (+)foot brake.
   • Connect the lock/unlock wires as specified in the wiring diagram.
   • Ensure proper grounding while running.
4. If using data-link, always ensure a direct connection.
5. Refer to the vehicle-specific wiring diagram for further instructions on connecting the bypass unit.
6. Cut and connect the necessary wires according to the wiring diagram.
7. Make sure all connections are secure and properly insulated.
8. Verify that the immobilizer bypass is functioning correctly by testing the lock, unlock, arm, disarm, parking lights, and foot brake functions.

Note: It is recommended to refer to the complete user manual for detailed installation instructions and troubleshooting steps.

Vehicle functions

FIRMWARE VERSION VERSION LOGICIELLE

• 71.[44]
• FORD MINIMUM

To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.

Program bypass option

• IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:

UNIT OPTION OPTION UNITE/DESCRIPTION

• A11/OFF NON
  • Hood trigger (Output Status)

Parts required (Not included)

• 1X 1K Ohm Resistorode

MANDATORY INSTALL

• HOOD PIN
• HOOD STATUS: THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
• Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed THIS MODULE MUST BE INSTALLED BY AQUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

WIRING CONNECTION

PROGRAMMING PROCEDURE

REMOTE STARTER FUNCTIONALITY

Notice: Updated Firmware and Installation Guides Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com. to get the latest version.

TECH SUPPORT

• Tél: 514-255-HELP (4357) 1-877-336-7797
• www.fortinbypass.com.
• INTERFACE MODULE
• Made in Canada
• PATENTS PENDING US: 2007-228827-A1
• www.fortinbypass.com.
• Service No: 000 102 04 2536
• WEB UPDATE
• REV.: 20220107
• Guide # 80791
• This guide may change without notice. See www.fortin.ca. for latest version.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>