FORTIN 103821 Hyundai Tucson 2016 Standard Key Remote Starters and Alarm Systems Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
FORTIN 103821 Hyundai Tucson 2016 Standard Key Remote Starters and Alarm
Systems Installation Guide
HYUNDAI
Tucson: 2016
To add the firmware version and the options, use the FLASH LINK UPDATER or
FLASH LINK MOBILE tool,
sold separately
DESCRIPTION
In the driver’s side kick panel
WIRING CONNECTION
Back view – Blue 6-pin connector, at ignition connector.
Back view – Bleu 48-pin connector, at the MC-11 in the driver’s side kick panel.
US Models: If the (~) EMS COM wire is not present the vehicle is not equipped with an immobilize
PROGRAMMING PROCEDURE
Press and hold Insert the programming button: the 4-Pin (Data-Link Connector) connector.
The LED will alternate between YELLOW and RED.
Release the programming button when the LED is RED.
If the LED is not solid RED disconnect the 4 Pin connector (Data-Link
Connector) and go back to step 1.
Insert the required remaining connectors.
Press and release the programming button 7 times (7x).
The RED LED will flash 6 times and pause.
Turn the Ignition to the ON/RUN position.
The RED LED will flash rapidly 10x times. Key bypass programmed.
Turn the Ignition OFF.
The module is now programmed.
Use the remote of the remote starter or security system to test all of the supported features to ensure proper programming.
Module label
HARDWARE VERSION FIRMWARE VERSION
INTERFACE MODULE
Made in Canada
PATENTS PENDING US: 2007-228827-A1
www.fortinbypass.com
Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest firmware
and download the latest installation guide(s) prior to the installation of
this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
Copyright © 2006-2015, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
WEB UPDATE | MISE À JOUR INTERNET
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>