FORTIN 104091 2012 Chrysler 200 Remote Starters Regular Key and Alarm Systems Installation Guide

STAND ALONE INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION

104091 2012 Chrysler 200 Remote Starters Regular Key and Alarm Systems

ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES.
Vehicle functions supported in this diagram (functional if equipped)
VEHICLE
YEARS
CHRYSLER
200
2011-2014
2008-2010
DODGE
Avenger
2008-2014

HARDWARE VERSION
MINIMUM
6
FIRMWARE VERSION
74.[38] CHRYSLER/DODGE/JEEP/MITSUBISHI MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately. Program bypass option:

IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:

Program bypass option (If equiped with OEM alarm):

Parts required (Not included) 1X Fuse

MANDATORY INSTALL

* HOOD PIN HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

A11|
---|---

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

PARTS REQUIRED (NOT INCLUDED)

| FLASH LINK UPDATER,
---|---
| FLASH LINK MANAGER SOFTWARE
| Microsoft Windows Computer with Internet connection

OR

| FLASH LINK MOBILE
---|---
|  FLASH LINK MOBILE APP
| Smartphone AndroId or iOS with Internet connection (provider charges may apply).

MANDATORY
HOOD PIN REMOTE START SAFETY OVERRIDE SWITCH VALET SWITCH
Part #: RSPB available, Sold separately.
Notice: the installation of safety elements are mandatory.
The hood pin and the valet switch are essential security elements and must be installed.

STAND ALONE CONFIGURATION

Program bypass option OEM Remote Stand Alone Remote Starter:

Program bypass option with oem remote

Program bypass option with RF KIT antenna:

REMOTE STARTER FUNCTIONALITY

| |
---|---|---
All doors must be closed.| Press the OEM remote’s Lock button 3x to remote- start (or remote-stop) the vehicle.| The vehicle will START.

REMOTE STARTER DIAGNOSTICS
MODULE RED LED

before start
x5 fash :| Hood Open

REMOTE STARTER WARNING CARD

CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE: or use the package RSPB, Sold separately.
WARNING
REMOTE STARTER
THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE DASHBOARD BEFORE WORKING ON THE VEHICLE.

WIRING CONNECTION

PROGRAMMING PROCEDURE

1. Press and hold the programming button:
   Connect the 4-PIN Data-link hamness (Black connector).
   The Blue, Red, Yellow and Blue & Red LEDS will alternatively iluminate.

2. Release the programming button when the LED is BLUE.
   Ifthe LED s not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.

3. Insert the required remaining connectors.

4. Turn the key to the Ignition ON/RUN position.
   The BLUE LED will flash rapidy.Turn the key to the OFF position.
   The BLUE LED will flash rapidy.

5. With OEM remote
   Press the LOCK button on the vehicles OEM remote.
   or
   Without OEM remote Press and release the programming bution on the module once.

The BLUE LED will tur off.
The module is now programmed.
Use the remote of the remote starter or security system to test all of the supported features to ensure proper programming.

Module label
www.fortinbypass.com

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

Copyright © 2006-2018, FORTIN AUTO RADIOINC
ALL RIGHTS RESERVED PATENT PENDING
TECH SUPPORT
Tel: 514-255-HELP (4357) 1-877-336-7797
ADDENDUM GUIDE
www.fortinbypassacom
WEB UPDATE I MISE A JOUR INTERNET

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>