FORTIN 84001 Chevrolet Traverse Push to Start Remote Starters and Alarm Systems Installation Guide

REGULAR INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION

84001 Chevrolet Traverse Push to Start Remote Starters and Alarm Systems

VEHICLE
YEARS
2019-2022/2018-2022
CHEVROLET
Blazer
Push-To-Start

Vehicle functions supported in this diagram (functional if equipped)

the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
---|---|---
| Program bypass option
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:| UNIT OPTION OPTION UNITE| DESCRIPTION
---|---|---|---
A11| | Hood trigger (Output Status).
| Program bypass option:| UNIT OPTION| DESCRIPTION
---|---|---|---
C1| OEM Remote status (Lock/Unlock) monitoring
D6| Push-to-Start
ATTENTION| | E5| | By default  DEACTIVATED
---|---|---|---|---
| MANUFACTURED MODULES BETWEEN: 04/2018 TO04/2019
Program remote starter option for R.S. OEM REMOTE STAND ALONE:| 38| 2| Enable
Press 3x Lock to remote start with the OEM remote.
---|---|---|---

MANDATORY INSTALL
*HOOD PIN

HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED)
MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
SECURITY STICKER
WARNING
……………….
Included
Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

Parts required (Not included)
1X 1k Ohm Resistor

WIRING CONNECTION

KEY CONTROL

CHEVROLET BLAZER

1. Remove the battery from the OEM remote.
2. Place the OEM remote in the front cup holder in the center console. Refer to vehicule user guide for keyport location.

KEY BYPASS PROGRAMMING PROCEDURE 1/2
CHEVROLET TRAVERSE

1. Remove the battery OEM remote.
2. Place the OEM remote into the transmitter pocket of the center console.
   Refer to vehicule user guide for keyport location.

| Press and hold the Insert programming button: Insert the 6-Pin Main connector.
↪ The LEDs will alternate between BLUE, RED, YELLOW & BLUE/RED flashes.
---|---
| Release the programming button when the LED is YELLOW.
If the LED is not solid YELLOW disconnect the 6-Pin connector (Main-Harness) and go back to step 1. disconnect
| Insert the required remaining connectors.
| Press and release the programming button five (5x) times.
↪ The YELLOW LED will flash 5 times each second.
↪ WAIT for the YELLOW LED to turn ON solide.
| Open the driver door.
| Press the foot-brake pedal.
Press the Push-to-Start button until the engine start.
Release the foot-brake pedal.
↪ The RED LED will turn ON
↪ The YELLOW LED will turn OFF.
| Press the Push-to- Start button until the engine turn OFF.
| Close and open the driver door.
| Press the foot-brake pedal.
Press the Push-to-Start button until the engine start.
Release the foot-brake pedal.
↪ The BLUE LED will turn ON.
↪ The BLUE LED will turn OFF.
The RED LED will turn OFF.
↪ The YELLOW LED will flash rapidly
↪ The BLUE LED will turn ON.
↪ The BLUE LED will flash rapidly
| Press the Push-to- Start button until the engine turn OFF.
↪ The BLUE LED will flash slowly
| Disconnect all connectors and after the 6-Pin (Main-Harness) or the 4-Pin Data-link connector.
| Use the tool:
FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
*Parts required (not included)
| AFTER DCRYPTOR PROGRAMMING COMPLETED
Go back to the vehicle and reconnect the 6-Pin (MainHarness) or the 4-pins (Data-Link) connector and after all the remaining connector.
| The module is now programmed.
---|---
| REMOTE STARTER / ALARM VERIFICATION PROCEDURE
Test the remote starter. Remote start the vehicle.

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

| |
---|---|---
All doors must be closed.| Remote start the vehicle.| Unlock the doors with either:
• The OEM remote
• The remote-starter remote
• Or the proximity remote
| |
Enter the vehicle with the Intelligent Key.| The vehicle can now be put in to gear and driven.|

If the vehicle is not unlocked with one of these conditions the remote-starter will shut down as soon as any door is opened.
Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regularbasis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

www.fortinbypass.com
Module label

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

Copyright © 2006-2018, FORTIN AUTO RADIO INC
ALL RIGHTS RESERVED PATENT PENDING
This guide may change without notice. See www.fortin.ca for latest version.

TECH SUPPORT
Tel: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

Documents / Resources

| FORTIN 84001 Chevrolet Traverse Push to Start Remote Starters and Alarm Systems [pdf] Installation Guide
84001 Chevrolet Traverse Push-to-Start Remote Starters and Alarm Systems, 84001, Chevrolet Traverse Push-to-Start Remote Starters and Alarm Systems, Remote Starters and Alarm Systems, Alarm Systems
---|---

References

• Remote Car Starters, Car Alarms, Immobilizer Bypass and Connected Vehicle Solutions | Fortin Electronic Systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>