FORTIN 90271 2020 Audi Q3 Push Button Remote Starters and Alarm Systems Installation Guide

FORTIN 90271 2020 Audi Q3 Push Button Remote Starters and Alarm Systems Installation Guide

REGULAR INSTALLATION INSTALLATION RÉGULIÈRE

ADDENDUM – SUGGESTED WIRING CONFIGURATION
ADDENDA – SCHÉMA DE BRANCHEMENT SUGGÉRÉ

| Vehicle functions supported in this diagram (functional if equipped)
---|---
VEHICLE VEHICULES| YEARS ANNÉES|

Lock

| Unlock| Arm| Disarm| Trunk (open)| Tachometer

| Door Status| Trunk Status| Hood Status *| Hand-Brake Status| Foot-Brake Status| Key Control|

OEM Remote monitoring

AUDI
Q3| Push-to-Start|

2019-2022

| •| •| •| •| •| •| •| •| •| •| •| •|

•

| BYPASS
FIRMWARE VERSION
61.[12] VW MINIMUM| To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
---|---|---
| Program bypass option:|

UNIT OPTION OPTION UNITE

|

DESCRIPTION

C1

| OEM Remote status (Lock/Unlock) monitoring
Push-to-Start
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:|

A11 / OFF NON

| Hood trigger (Output Status)
Contact de capot (état de sortie
Program bypass option (If equipped with OEM alarm):|

D2

| Unlock before / Lock after (Disarm OEM alarm)
MANDATORY INSTAL| INSTALLATION OBLIGATOIRE
*HOOD NON PIN
**| HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF
A11 / OFF

| SECURITY STICKER**

Included| Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.| THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

NOTES

| Program remote starter option:| FUNCTION| MODE| DESCRIPTION
---|---|---|---|---

32

|

6

| Bypass control
Contrôle par le module de contournement
for R.S. OEM REMOTE STAND ALONE:

|

38

|

5

| Enable (Press Lock, Unlock and Lock to remote start)
Actives :

Parts required (Not included)
1x Vehicle Key
1x 10Amp Fuse
2x Diode
1 KEY REQUIRED FOR THE INSTALLATION

AUTOMATIC TRANSMISSION WIRING CONNECTION

KEY BYPASS PROGRAMMING PROCEDURE

1. Press and hold the programming button:
   Insert the 6-Pin Main connector.
   -The LEDs will alternate between BLUE, RED, YELLOW & BLUE/RED flashes.
   

2. Release the programming button when the BLUE LED is ON.
   

3. Insert the required remaining connectors.
   

4. Do not press the brake pedal.
   Press the Push-to-Start button once to turn on the ignition.
   -The BLUE LED will flash rapidly.
   

5. Press the Push-to-Start
   button once to turn off the
   ignition

   The BLUE LED will turn off.
   

The module is now programmed.

REMOTE STARTER PROGRAMMING PROCEDURE

**REFER TO THE QUICK INSTALL GUIDE** INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

This guide may change without notice. See www.fortin.ca for latest version.

REMOTE STARTER FUNCTIONALITY

All doors must be closed.|
Remote start
the vehicle.|
Unlock the doors with either:

• The OEM remote
• The remote-starter remote or
• The door handle

|
Enter the vehicle with the Intelligent Smart Key.|
The vehicle can now be put in to gear and driven.
---|---|---|---|---

Notice: Updated Firmware and Installation Guides

Updated fir mare and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rewire and download the latest installation guide(s) prior to the installation of this product.

HARDWARE VERSION
FIRMWARE VERSION
Date: xx-xx
EVO-ONE
INTERFACE MODULE
Made in Canada
PATENTS PENDING US: 2007-228827-A1
www.fortinbypass.com

Module label

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>