MEAN WELL LCM-60BLE 60W Wireless Lighting Constant Current LED Driver Solution User Guide

60W Wireless Lighting Constant Current LED Driver Solution
LCM – 60 IoT Series
User Guide

LCM-60BLE 60W Wireless Lighting Constant Current LED Driver Solution

http://www.meanwell.com.cn/Upload/PDF/LED_EN.pdf

■ Features

• Constant Current mode output with multiple levels selectable by dip switch
• Flicker free design
• Plastic housing with class II design
• Temperature compensation function by external NTC
• Functions: Bluetooth low energy mesh Synchronization up to lOunits
• 3 years warranty

■ Applications

• LED indoor lighting
• LED office lighting
• LED panel lighting
• LED commercial lighting
• Intelligent lighting control

■ GTIN CODE
MW Search. https://www.meanwell.com/serviceGTIN.aspx

■ Description

LCM-60 loT series is a 60W AC/DC constant current mode output LED driver featuring the multiple levels selectable by dip switch and integration with Bluetooth control solution.LCM-60 loT operates from 180-295VAC and offers different current levels ranging between 500mA and 1400mA. Thanks to the high efficiency up to 91%, with the fanless design, the entire series is able to operate for -20C -+90 C case temperature under free air convection. In addition, LCM-60 loT is designed with freely assignable input and synchronization function, so as to provide the optimal design flexibility for LED lighting system and upgrade lighting to be an intelligent lighting system.

■ Model Encoding loT wireless Module brand and soloution

SPECIFICATION

please refer to”DIP SWITCH TABLE” section
500mA| 600mA| 700mA(default)| 900mA| 1050mA| 1400mA
RATED POWER| 60.3W
DC VOLTAGE RANGE| 2 ~ 90V| 2 ~ 90V| 2 ~ 86V| 2 ~ 67V| 2 ~ 57V| 2 ~ 42V
OPEN CIRCUIT VOLTAGE (max.)| 95V| 73V
CURRENT RIPPLE Note.5| 5.0% max. @rated current
CURRENT TOLERANCE| ±5%
AUXILIARY DC OUTPUT| Nominal 12V(deviation 11.4~12.6V)@50mA for AUX-Type only(option)
INPUT| VOLTAGE RANGE Note.2| 180 ~ 295VAC  254 ~ 392VDC (Please refer to “STATIC CHARACTERISTIC” section)
FREQUENCY RANGE| 47 ~ 63Hz
POWER FACTOR (Typ.)| PF≧0.975/230VAC, PF≧0.96/277VAC@full load
(Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
TOTAL HARMONIC DISTORTION| THD< 20%(@load≧75%)
(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
EFFICIENCY (Typ.) Note.4| 91%
AC CURRENT (Typ.)| 0.32A/230VAC
0.27A/277VAC
INRUSH CURRENT (Typ.)| COLD START 20A (twidth=270μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER| 25 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT| <0.5mA / 240VAC
STANDBY POWER CONSUMPTION
Note.8| <1W
PROTECTION| SHORT CIRCUIT| Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE| 105 ~ 125V
Shutdown o/p voltage, re-power on to recover
OVER TEMPERATURE| Shutdown o/p voltage,re-power on to recover
FUNCTION| WIRELESS PROTOCOL| Bluetooth low energy 2.4GHz protocol
DIMMING RANGE
Note.9| 0~100% Minimum dimming level:6%,dim to off
SYNCHRONIZATION| Please refer to “SYNCHRONIZATION OPERATION” section
TEMP. COMPENSATION| By external NTC, please refer to “TEMPERATURE COMPENSATION OPERATION”section
ENVIRONMENT| WORKING TEMP.| Tcase=-20 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.| Tcase=+90℃
WORKING HUMIDITY| 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT| ±0.03%/℃ (0 ~ 50℃)
VIBRATION| 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & **EMC| SAFETY STANDARDS| UL8750, CSA C22.2 No.250.13-12, ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384 independent, GB19510.14,GB19510.1,BIS IS15885, EAC TP TC 004 approved
WITHSTAND VOLTAGE| I/P-O/P:3.75KVAC
ISOLATION RESISTANCE| I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION ****Note.7| Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C(@load≧40%) ; BS EN/EN61000-3-3; GB17625.1,GB17743, EAC TP TC 020
EMC IMMUNITY| Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level(surge immunity Line-Line 2KV), EAC TP TC 020
OTHERS| MTBF| 2453.7K hrs min.      Telcordia SR-332 (Bellcore) ; 238.3K hrs min.      MIL-HDBK-217F (25℃)
DIMENSION| 123.581.523mm (LWH)
PACKING| 0.24Kg ; 54pcs/15Kg/1.12CUFT
NOTE**| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. De-rating may be needed under low input voltages. Please refer to “STATlC CHARACTERlSTlC” sections for details.
3. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
4. Efficiency is measured at 900mA/67V output set by DlP switch.
5. Current ripple is measured 60%~100% of maximum voltage under rated power delivery.
6. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
8. The standby power consumption does not need to meet ErP due to the integrated wireless transmitter which is working all the time.
9. The dimming memory function needs at least 5 seconds to complete.
10. The matching mode of TY1 type is on-off-on-off-on by AC or DC power
11. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains.
※ Product Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

BLOCK DIAGRAM

PFC fosc: 60KHz
PWM fosc: 80KHz

DIP SWITCH TABLE
LCM-60 IoT series is a multiple-stage constant current driver, selection of output current through DIP switch is exhibited below.

DIP S.W.
lo| 1| 2| 3| 4| 5| 6
---|---|---|---|---|---|---
500mA| —-| —-| —-| —-| —-| —-
600mA| ON| —-| —-| —-| —-| —-
700mA(factory default)| ON| ON| —-| —-| —-| —-
900mA| ON| ON| ON| | —-| ON
1050mA| ON| ON| ON| ON| —-| ON
1400mA| ON| ON| ON| ON| ON| ON

NOTE: For more output current is selectable, please contact MEANWELL for details

DIMMING OPERATION

※Bluetooth control

• To be used through APP available on Apple Store and Google Play Store for iOS and Android. Search: BLE with Casambi/TY1 with Smart Life/SVA with Silvair

Example:

The APP for BLE type is “Casambi”
The APP for TY1 type is “Smart Life”
The APP for SVA type is “Silvair”

OFFICIAL WEBSITE AND ECOSYSTEM INFORMATION

The real time Bluetooth IC temperature is shown in the APP. In case it reaches above 72 ºC (equivalent to Tc 85ºC), the driver will be turn off to provide a protection.
In case the units is cooled down, it can be manually turn ON and back to normal operation again.
NOTE:

1. This software temperature protection is an extra independent function from driver its own hardware over temperature protection(when it is enabled, it needs re-AC power on to recover).
2. In general the software temperature protection is triggered before the hardware one when in over temperature.
3. Website: https://www.casambi.com

NOTE: 1. Website: https://www.tuya.com

NOTE: 1. Website: https://www.silvair.com

PUSH DIMMING FUNCTION

※ Freely assignable (push) input(Push dimming function only for BLE)

• The LCM BLE series also has one freely assignable AC mains (push) input. As with a CASAMBI sensor module, control pulses can be defined here (e.g. “controls a luminaire”; “controls an element”; “controls a group”; “controls scenes”; “controls all luminaires”; “change scenes”). See the reference connection figure in the above.

SYNCHRONIZATION OPERATION

• Synchronization up to 10 drivers (1 master + 9 slaves)
• Dimming operating range : 10%~100%
• Sync cable length : < 5m
• Sync cable type : Flat cable
• Sync cable cross section area : 22 – 24 AWG (0.2~0.3mm²)

NOTE:

1. Please make sure all units are set to 100% dimming setting (factory default) before synchronizing.
2. Min. Dimming operating range depends on dimmer setting.

TEMPERATURE COMPENSATION OPERATION

LCM-60 IoT series have the built-in temperature compensation function ; by connecting a temperature sensor (NTC resistor) between the +NTC / -NTC terminal of LCM-60 IoT series and the detecting point on the lighting system or the surrounding environment, output current of LCM-60 IoT could be correspondingly changed, based on the sensed temperature, to ensure the long life of LED.

◎ LCM-60 IoT series can still be operated normally when the NTC resistor is not connected and the value of output current will be the current level selected through the DIP switch.
◎ NTC reference:

level)

60 C output current begins to reduce, please refer to the curve for details.
330K| < 70 C 100% of the rated current (corresponds to the setting current level)
70 C output current begins to reduce, please refer to the curve for details.
470K| < 80 C 100% of the rated current (corresponds to the setting current level)
80 C output current begins to reduce, please refer to the curve for details.

Notes:

1. MEAN WELL does not offer the NTC resistor and all the data above are measured by using THINKING TTC03 series.
2. If other brands of NTC resistor is applied,please check the temperature curve first.

◎ Dimming and synchronization function of the driver will be invalid when the “temperature compensation” function is in use.

OUTPUT LOAD vs TEMPERATURE

STATIC CHARACTERISTIC

※ De-rating is needed under low input voltage.

■ Bluetooth mesh LED driver for intelligent lighting Application

TOTAL HARMONIC DISTORTION (THD)

※ Tcase at 80℃

POWER FACTOR (PF) CHARACTERISTIC
※ Tcase at 80℃

EFFICIENCY vs LOAD
LCM-60 IoT series possess superior working efficiency that up to 91% can be reached in field applications.
※ Tcase at 80℃

MECHANICAL SPECIFICATION

Case No.LCM-60A Unit:mm

※ Terminal Pin No. Assignment(TB1)(Input)

※ Terminal Pin No. Assignment (TB3)

※ Terminal Pin No. Assignment (TB5)(Output)
◎ Pin1(+AUX) / Pin2(-AUX) is the Auxiliary DC output for the optional model; it can be used to drive fan.

※ SYN. Connector (CN101/CN100):

Installation Manual
Please refer to: http://www.meanwell.com/manual.html
File Name: LCM-60 IoT-SPEC 2022-02-18

References

• Product Liability Disclaimer-MEAN WELL Switching Power Supply Manufacturer
• Casambi - Smart Lighting Control
• Silvair - Reliable and energy-efficient lighting control
• Tuya Smart - Global Cloud Platform Service Provider

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>