SEALEY SMC30.V2 Motorcycle Engine Crankcase Separator Instruction Manual
- June 4, 2024
- SEALEY
Table of Contents
MOTORCYCLE ENGINE CRANKCASE
SEPARATOR
MODEL NO: SMC30.V2
SMC30.V2 Motorcycle Engine Crankcase Separator
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble-free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE
FOR FUTURE USE.
SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop
practice regulations are adhered to when using this tool.
WARNING! Familiarise yourself with the specific applications and
limitations of the kit, as well as any potential hazards.
This kit should be used in conjunction with inspection maintenance procedures
recommended in the vehicle manufacturer’s manual.
Ensure that the kit is correct for the task.
Wear the appropriate personal protective equipment for the task. A full range
is available from your Sealey stockist.
DO NOT use the kit for any purpose other than that for which it is designed.
Ensure there is adequate lighting prior to using the kit. A range of
inspection lamps are available from your Sealey stockist.
Keep children and unauthorized persons away from the working area.
DO NOT use the kit if any parts are damaged or missing, as this may cause
failure and/or personal injury.
DO NOT use the kit when you are tired, or under the influence of alcohol,
drugs or intoxicating medication.
After use, store in a safe, dry childproof area.
INTRODUCTION
Fully adjustable robust tool for assisting in the successful separation of the engine crankcases to allow access to the crankshaft, connecting rods, and other internal components. Suitable for use on a variety of motorcycle and ATV engines. Supplied in storage case.
CONTENTS
| Item | Part no. | Description |
|---|---|---|
| 1 | SMC30.V2.02 | Main threaded bar M14 x 1.5 x 180mm |
| 2 | SMC30.V2.03 | Mounting bolt M8 x 1.25 x 90mm (x3) |
| 3 | SMC30.V2.06 | Mounting bolt adaptor M6 x 1 x 65mm |
| 4 | SMC30.V2.05 | Mounting bolt adaptor M6 x 1 x 57mm |
| 5 | SMC30.V2.04 | Mounting bolt adaptor M6 x 1 x 50mm |
OPERATION
NOTE: Suitable for engines with M6 casing bolts only.
4.1. Lightly lubricate all threads.
4.2. Assemble the tool as shown in fig.2 and fig.3.
4.3. Select appropriate height M6 adaptors to ensure that the tool is level
before use (see fig.3).
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories, and packaging should be sorted, taken to a recycling center, and
disposed of in a manner that is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications, and component parts without
prior notice. Please note that other versions of this product are available.
If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk
or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: The guarantee is 12 months from the purchase date, proof of
which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
IP32 7AR
01284 757500
01284 703534
sales@sealey.co.uk
www.sealey.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>