Electrolux EDI1004 EasyLine Dry Iron Instructions

June 6, 2024
Electrolux

Electrolux EDI1004 EasyLine Dry Iron Instructions

Instruction book

Before using the iron for the first time, please read the safety advice carefully.

Read the following instruction carefully before using the product for the

first time.

  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
    or instruction concerning use of the appliance by a person responsible for their safety.

  • Children should be supervised to ensure that they do not play with the appliance.

  • The appliance may only be connected to a power supply where voltage and frequency comply with the specifications on the rating plate.

Getting started

  1. Before first use. Remove all adhesive remains and gently rub with a dampened cloth.
    When turned on for the first time, temporary odours may occur.

Ironing chart

Fabric Temperature setting Ironing recommendation

Acrylic, Acetate, Nylon,

Synthetics, Rayon, Viscose

|  | Iron on reverse side while still damp or use spray to dampen.
Silk, Cotton blends, Wool & wool blends|  | Iron on reverse side. Use an ironing cloth to prevent shine marks. Check label and follow manufacturer’s instructions. For blends, use setting for the

fibre requiring lowest setting.

Cotton, Corduroy, Linen,

Denim

|  | Iron while still damp or use spray to dampen. Use ironing cloth to prevent

shine marks, especially with dark colours.

Tips: Always start ironing the fabrics that require low ironing temperature setting, and then increase the temperature setting for fabrics which require higher temperature. The iron heats up faster than it cools down

  1. Always store iron on its heel rest. To clean exterior surfaces, use a damp soft cloth and wipe dry. Do not use any chemical solvents, as these will damage the surface.
  2. Cleaning the soleplate. Do not use scouring pads or harsh cleaners on the soleplate as these will damage the surface. To remove burnt residue, iron over a damp cloth while iron is still hot. To clean the soleplate, simply wipe with soft damp cloth and wipe dry.

Troubleshooting

Disposal

Packaging materials
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose the
packaging materials in the appropriate container at the community waste disposal facilities.

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals