VISUAL COMFORT KW 3660 Miramar Accent Lamp Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT KW 3660 Miramar Accent Lamp
Product Information
| Product Name | Miramar Accent Lamp |
|---|---|
| Item Number | KW 3660 |
| Package Contents | A, B, C (packaged separately), D (bulbs not included), E |
(protective cover)
Notice| This light fixture should be installed in accordance with all
applicable, local installation codes, and by a person familiar with
the construction and operation of it, as well as the hazards
involved. Inspect item and contents carefully. If any damage or
defect is found, do not install. Retain all packaging material
until installation is complete and approved.
Tools Required (Not Included)| Scissors
Care Instructions| Clean only with a soft dry cloth or feather duster. Do not
use
abrasive or chemical agents.
Product Usage Instructions
- Carefully remove all parts from the box. Place on a clean, soft surface.
- Remove finial (A) and diffuser (B) from fixture (D).
- Remove shade (C) from the packaging, then install shade (C) and diffuser (B) to fixture (D) using finial (A). Note: If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damage.
- Install light bulbs into the sockets.
- Remove the protective cover (E) from the plug.
- Plug into an electrical outlet and test the fixture.
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED)
- Scissors
ASSEMBLY INSTRUCTIONS
- Carefully remove all parts from the box. Place on a clean, soft surface.
- Remove finial (A) and diffuser (B) from fixture (D).
- Remove shade (C) from the packaging, then install shade (C) and diffuser (B) to fixture (D) using finial (A).
- NOTE: If the shade has additional packaging, carefully cut off from the interior of the shade to avoid damage.
- Install light bulbs into the sockets.
- Remove the protective cover (E) from the plug.
- Plug into an electrical outlet and test the fixture.
- Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>