FORTIN 67841 GMC Acadia 2018 Push-to-Start Remote Starters and Alarm Systems Installation Guide

FORTIN 67841 GMC Acadia 2018 Push-to-Start Remote Starters and Alarm

Systems

Product Information

• Product Name: Immobilizer Bypass
• Manufacturer: Fortin
• M o del: EVO-ONE
• Vehicle Compatibility: GMC Acadia (Push-To-Start) 2017-2022
• Bypass Firmware Version: 70.[41]
• Manufactured Modules: Yes (Between 04/2018 to 04/2019)
• Website: www.fortinbypass.com

Product Usage Instructions

1. Program bypass option:
2. If the vehicle is not equipped with a functional hood pin, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool (sold separately) to add the firmware version and options.
3. Unit Option: A11 (OFF)
4. Push-to-Start:
5. Unit Option: C1 (Push-to-Start)
6. Program remote starter option for R.S. OEM REMOTE STAND ALONE:
7. Enable the option.
8. Press the lock button on the OEM remote 3 times to remote start the vehicle.
9. Mandatory Install:
10. Install a hood pin contact if the vehicle can be remote started with the hood open.
11. Set Function A11 to OFF.
12. Parts Required (Not Included):
13. 1X 1k Ohm Resistor
14. Make the connection:
15. Follow the color-coded connections mentioned in the manual for various components such as ignition, lock, unlock, foot brake, parking lights, etc.
16. Cut Loop for Automatic Transmission Mode:
17. Cut the loop for automatic transmission mode (specific instructions not provided in the manual).

Please note that this is a summary of the product information and usage instructions. For detailed installation and setup instructions, please refer to the complete user manual provided with the product.

REGULAR INSTALLATION

**MANDATORY INSTALL

• HOOD PIN
  HOOD STATUS :** THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

Parts required (Not included)

• 1X 1k Ohm Resistor

AUTOMATIC TRANSMISSION WIRING CONNECTION

KEY BYPASS PROGRAMMING PROCEDURE 1/2

1. Remove the battery from the OEM remote.

2. Place the OEM remote into the transmitter pocket of the center console.

3. Press and hold Insert the programming button: the 6-Pin Main connector

4. The LEDs will alternate between BLUE, RED, YELLOW & BLUE/RED flashes

5. Release the programming button when the LED is YELLOW.
   If the LED is not solid YELLOW the 6-Pin connector (Main-Harness) and go back to step 1.

6. Insert the required remaining connectors.

7. Press and release the programming button five (5x) times

8. The LED will flash 5 times each second.

9. WAIT for the YELLOW LED to turn ON solide.

10. Open the driver door

11. Press the foot-brake pedal
    Press the Push-to-Start button until the engine start.
    Release the foot-brake pedal.

12. The RED LED will turn ON.

13. The YELLOW LED will turn OFF.

14. Press the Push-to-Start button until the engine turn OFF.

15. Close and open the driver door

16. Press the foot-brake pedal.
    Press the Push-to-Start button until the engine start.
    Release the foot-brake pedal.

17. The BLUE LED will turn ON.

18. The BLUE LED will turn OFF. The RED LED will turn OFF.

19. The YELLOW LED will flash rapidly

20. The BLUE LED will turn ON.

21. The BLUE LED will flash rapidly

22. Press the Push-to-Start button until the engine turn OFF.

23. The BLUE LED will flash slowly

24. Disconnect all connectors and after the 6-Pin (Main-Harness) or the 4-Pin Data-link connector

25. Use the tool: FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu
    *Parts required (not included)

26. AFTER DCRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 6-Pin (Main- Harness) or the 4-pins (Data-Link) connector and after all the remaining connector.

The module is now programmed.
REMOTE STARTER / ALARM VERIFICATION
Test the remote starter. Remote start the vehicle.

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING

REMOTE STARTER FUNCTIONALITY

• All doors must be closed.
• Remote start the vehicle.
• Unlock the doors with either:
  • The OEM remote
  • The remote-starter remote
  • Or the proximity remote
• Enter the vehicle with the Intelligent Key.
• The vehicle can now be put in to gear and driven.

If the vehicle is not unlocked with one of these conditions the remote-starter will shut down as soon as any door is opened.

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

If the vehicle is not unlocked with one of these conditions the remote-starter will shut down as soon as any door is opened.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN

ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

References

• Remote Car Starters, Car Alarms, Immobilizer Bypass and Connected Vehicle Solutions | Fortin Electronic Systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>