FORTIN 021-2022 K5 2.5L EVO-ALL and Hyundai Push To Start Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
REV.: 20220222
GUIDE # 101031 REGULAR INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION
021-2022 K5 2.5L EVO-ALL and Hyundai Push To Start
VEHICLE
YEARS
Vehicle functions supported in this diagram (functional if equipped)
• | Immobilizer bypass |
---|---|
• | Lock |
• | Unlock |
• | Arm |
• | Disarm |
• | Parking Light |
• | Trunk Release |
• | Horn |
• | Tachometer |
• | Door Status |
• | Hood Status* |
• | Trunk Status |
• | Foot-Brake Status |
• | Secure Take Over |
• | OEM Remote monitoring** |
FIRMWARE VERSION
76.[60] HYUNDAI/KIA MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or
FLASH LINK MOBILE tool, sold separately. Program bypass option:
UNIT OPTION | DESCRIPTION |
---|---|
C1 | OEM Remote status (Lock/Unlock) monitoring |
D6 | Push-to-Start |
A11 |
NOTES
The vehicles OEM remote and SmartKey are still operable during remote
start.
Parts required (Not included)
1X Fuse
2X 1Amp Diodes
4X 3Amp Diodes
1X Diode
MANDATORY INSTALL
* HOOD PIN HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
A11|
---|---
Notice: the installation of safety elements are mandatory. The hood pin
is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION
CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
DESCRIPTION
WIRING CONNECTION 1/2
WIRING CONNECTION 2/2
PROGRAMMING PROCEDURE
-
alternatively illuminate.
Press and hold the programming button:
Insert the 4-Pin (Data-Link) connector.
Release the programming button when the Red LED is
The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.
If the Red LED is not ON solid disconnect the 4-PIN Data-Link -
Release the programming button when the Red LED is ON.
If the Red LED is not ON solid disconnect the 4-PIN Data-Link harness (Black connector) and go back to step 1.
Insert the required remaining connectors. -
Insert the required remaining connectors.
-
Press and release the programming button (6x).
The RED LED will flash 5 times and pause. -
Press and release the Push-toStart button twice to turn ON the ignition.
The Red LED will flash 10 times rapidly.
Key bypass programmed.
The Blue LED will flash rapidly.
CAN-Bus programmed.![FORTIN 021 2022 K5 2.5L EVO ALL and Hyundai Push To Start
-
PROGRAMMING 5](https://manuals.plus/wp- content/uploads/2023/09/FORTIN-021-2022-K5-2.5L-EVO-ALL-and-Hyundai-Push-To- Start-PROGRAMMING-5.png)
- Press and release the Push-toStart button once to shut off the ignition.
The Blue LED will turn off.
- Press and release the Push-toStart button once to shut off the ignition.
The module is now programmed.
Use the remote of the remote starter / security system to test all the
supported features and ensure all the features are properly programmed.
REMOTE STARTER FUNCTIONALITY
| | | | |
---|---|---|---|---|---
All doors must be closed.| Remote start the vehicle.| Unlock the doors with
either:
• The OEM remote
• The remote-starter remote or
• The door handle| Enter the vehicle with the Intelligent SmartKey.| DO NOT
PRESS THE BRAKE PEDAL.
Press and release the Push-to-Start button once.| The vehicle can now be put
in to gear and driven.
Module label
Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest fi rmware
and download the latest installation guide(s) prior to the installation of
this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit
before connecting to it. Only a computer safe logic probe or digital
multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no
liability or responsibility whatsoever pertaining to the accuracy or currency
of the information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualifi ed technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC
ALL RIGHTS RESERVED PATENT PENDING
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>