Kjell 30647 Ultra Thin Indoor UHF VHF Antenna Instruction Manual

manual
Ultra-thin indoor
UHF/VHF antenna
Item: 30647

30647 Ultra Thin Indoor UHF VHF Antenna

Specifications

Included:
UHF/VHF antenna, amplifier, amplifier cable (0.85 m), antenna cable (3 m), adapter cable (1.75 m), power adapter, antenna base, Velcro patches, cable clip, manual.

Use
Placement
Attach the antenna in the included antenna base and place it on a flat surface away from any strong magnetic fields. You can also attach the antenna on a wall or vertical surface using the included Velcro patches.
It is recommended to use the included antenna cable as extending the cable may decrease signal reception. If you are using the antenna with the included amplifier a longer cable can be used to place the antenna in a more favorable position. Make sure the cable is shielded and suitable for digital TV signals.
The included cable clips can be used to attach the antenna cable.
Note! If your TV can’t find any channels, the signal from the TV transmitter may be too weak. Try to move the antenna to a window that faces the nearest transmitter, then make a new channel search.
Connections
To receive TV signals the antenna must first be decoded by an external DVB-T[T2 digital receiver (sold separately) or a built-in digital receiver in your TV. You can use the antenna with or without the included amplifier depending on the  signal reception quality in your area.

Note! It is recommended to start setting up the connections using the amplifier (fig 1 and 2), and if the reception is too strong the amplifier can be removed (fig 3 and 4).
With amplifier
The amplifier can be powered by the included power adapter connected to a wall socket or by your digital receiver if it offers voltage out suitable for antenna amplifiers (5 V/30 mA). Refer to the digital receiver or TV manual for more info.
External digital receiver (fig 1.)
Connect the antenna to the amplifier ANT IN port. Connect the power adapter to the amplifier and a wall socket (or activate 5 V power in your external digital receiver). Connect the amplifier cable marked TO TV to your external digital  receiver ANT IN port, and connect your digital receiver to your TV using a suitable cable (HDMI, Scar) Run a channel search from your external receiver’s settings menu.

Built-in digital receiver (fig 2.)
Connect the antenna to the amplifier ANT IN port. Connect the power adapter to the amplifier and a wall socket (or activate 5 V power in your TV’s built-in digital receiver). Connect the amplifier cable marked TO TV to your TV’s ANT IN  port Run a channel search using your TV’s digital receiver settings.
Without amplifier
If the signal reception is already within optimal levels the use of an amplifier might make the signal too strong which can distort the picture quality or cancel out certain TV stations from your receiver. Try setting up the antenna without the included amplifier.
External digital receiver (fig 3.)
Connect the antenna to your external digital receiver ANT IN port and connect your digital receiver to your TV using a suitable signal cable (HDMI, Scart) Run a channel seatch from your external receiver’s settings menu.

Built-in receiver (fig 4.)
Connect the antenna to your TV’s ANT IN port.
Run a channel search using your TV’s digital receiver settings.

4G filter
The amplifier has a built in 4G filter. Using the antenna with the amplifier prevents the signal from being affected by 4G data signals.

Safety information

Read the instructions carefully before use.
Connect the included power adapter to the power port. Always grab the power adapter by the plug when disconnecting it, do not unplug it by pulling the cord. Use with provided adapters only.
Simplified EU Declaration of Conformity
Kjelle & Company hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of the EU declaration of conformity is available at www.kjell.com/30647 Specifications for power adapter

www.luxorparts.com
B0x 50435 Malamud
Sweden 2022-10-17

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>