FORTIN 2023 Subaru Forester Remote Start and Alarm Systems Installation Guide

June 13, 2024
FORTIN

FORTIN-logo

FORTIN 2023 Subaru Forester Remote Start and Alarm Systems

FORTIN-2023-Subaru-Forester-Remote-Start-and-Alarm-Systems-
\(1\)

Parts required (Not included)

  • 1X Fuse

**MANDATORY INSTALL

  • HOOD PIN
    HOOD STATUS :** THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

FORTIN-2023-Subaru-Forester-Remote-Start-and-Alarm-Systems-
\(4\) FORTIN-2023-Subaru-Forester-
Remote-Start-and-Alarm-Systems- \(5\)

WIRING CONNECTION

FORTIN-2023-Subaru-Forester-Remote-Start-and-Alarm-Systems-
\(6\) FORTIN-2023-Subaru-Forester-
Remote-Start-and-Alarm-Systems- \(7\) FORTIN-2023-Subaru-Forester-Remote-Start-and-Alarm-Systems-
\(8\)

DCRYPTOR PROGRAMMING PROCEDURE
PARTS REQUIRED (NOT INCLUDED)

1x FLASH LINK UPDATER,
1x FLASH LINK MANAGER
SOFTWARE | PROGRAMME
Microsoft Windows Computer with Internet connection Ordinateur Microsoft Windows avec connection Internet

1x FLASH LINK MOBILE
1x FLASH LINK MOBILE APP
Smartphone AndroId or iOS with Internet connection (provider charges may apply).
Téléphone Intelligent Android ou iOS avec connection Internet (frais du fournisseur Internet peuvent s’appliquer).

FORTIN-2023-Subaru-Forester-Remote-Start-and-Alarm-Systems-
\(11\)

  1. Press and hold the programming button: Connect the 4-PIN Data-link harness (Black connector).

  2. The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.

  3. Release the programming button when the LED are BLUE & RED.
    If the LED are not solid BLUE and RED disconnect the 4- Pin connector (Data- Link) and go back to step 1.

  4. Insert the required remaining connectors.

  5. Press and release the programming button six time (6x).

  6. The RED and BLUE LED will flash 5 times each second.

  7. Start the engine

  8. The RED LED will flash rapidly 10x times. Key bypass programmed.

  9. Wait for the BLUE LED will flash rapidly.

  10. when YELLOW and RED LED will alternate.

  11. Turn the key to the OFF position.

  12. Disconnect all the connectors and after the Data-Link (4-pins) connector.

  13. Use the tool: FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
    *Parts required (not included)

  14. AFTER DCRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector.

The module is now programmed.
REMOTE STARTER / ALARM VERIFICATION
Test the remote starter. Remote start the vehicle.

REMOTE STARTER FUNCTIONALITY

FORTIN-2023-Subaru-Forester-Remote-Start-and-Alarm-Systems-
\(15\)

  • All doors must be closed.
  • Remote start the vehicle.
  • Unlock the doors with the remote-starter remote or the OEM remote.
  • Insert and Turn the key to the Ignition ON/RUN position.
  • Press the brake pedal.
  • The vehicle can now be put in to gear and driven.

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

If the vehicle is not unlocked with one of these conditions the remote-starter will shut down as soon as any door is opened.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN

ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

FORTIN User Manuals

Related Manuals