FORTIN FX35 Push Button And Alarm Systems Installation Guide

FORTIN FX35 Push Button And Alarm Systems

Product Information

• Product Name: Standalone and THAR-NIS1 Harness Installation
• Guide Number: 100011
• Compatible Vehicles: Infiniti FX35, FX37, QX70
• Compatible Vehicle Models: Push-to-Start (AT) 2009-2013, Push-to-Start (AT) 2013, Push-to-Start (AT) 2014-2017
• Firmware Version: 72.[43]
• Minimum Nissan/Infiniti Firmware Version: Not specified
• Program Bypass Option: Yes
• Unit Options:
  • C1: OEM Remote status (Lock/Unlock) monitoring
  • D6: Push-to-Start
  • A11: OFF Hood trigger (Output Status)
• Description:
  • C1 : OEM Remote status (Lock/Unlock) monitoring
  • D6: Push-to-Start
  • A11: OFF Hood trigger (Output Status)

Product Usage Instructions

1. Mandatory Installation:
   • Hood Pin Contact (Must be installed)
2. Optional Installation:
   • Valet Switch (ON/OFF)
3. Program Bypass Option with OEM Remote:
   • Unit Option: D1.10
4. Program Bypass Option with RF KIT Antenna:
   • Unit Option: C1
5. Program Bypass Option for Vehicle Hybrid Only:
   • Unit Option: D4
6. Remote Starter Diagnostics:
   • MODULE RED LED | DEL ROUGE DU MODULE:
   • x3 flash: No tach
   • x4 flash: Ignition
   • x5 flash: Hood Open
7. Warning:
   • Cut the warning card and stick it in a visible place or use the package RSPB (sold separately)
   • The vehicle can be started by either pressing the lock button on the OEM remote 3 times consecutively or by a smartphone
   • Turn on the safety switch located under the dashboard before working on the vehicle

PRODUCT SPECIFICATION

Parts required (Not included)

MANDATORY INSTALL

HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.

STAND ALONE CONFIGURATION

REMOTE STARTER FUNCTIONALITY

REMOTE STARTER WARNING CARD

DESCRIPTION

AUTOMATIC TRANSMISSION WIRING CONNECTION

WIRING CONNECTION

WIRING CONNECTION

KEY BYPASS PROGRAMMING PROCEDURE 1/2

REMOTE STARTER FUNCTIONALITY

Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT

Tél:

• 514-255-HELP (4357)
• 1-877-336-7797
• www.fortinbypass.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>