FORTIN Infiniti QX50 2016 Push to Start Remote Starters and Alarm Systems Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
FORTIN Infiniti QX50 2016 Push to Start Remote Starters and Alarm Systems
REGULAR INSTALLATION
ADDENDUM
•
| Immobilizer bypass
•
| T-Harness available (sold separately)
•
| Lock
•
| Unlock
•
| Arm
•
| Disarm
•
| Tachometer
•
| Door Status
•
| Trunk Status
•
| Hood Status
•
| Hand-Brake Status
•
| Foot-Brake Status
•
| Push-to-Start Control
•
| OEM Remote monitoring
•
| R.S. OEM remote Stand Alone compatible
INFINITI
| BYPASS FIRMWARE VERSION VERSION LOGICIELLE CONTOURNEM
72.[48]
NISSAN/INFINITI MINIMUM| To add the firmware version and the options, use the
FLASH LINK UPDATER or FLASH LINK MOBILE tool,
sold separately.
---|---|---
| Program remote
starter option:| FUNCTION| MODE| DESCRIPTION
31| 4| (+) Parking Light (E1) (+) Accessory (E2)
| Program remote| FUNCTION| MODE|
Program remote starter option for R.S. OEM REMOTE STAND ALONE:| 32| 3| DK.Blue
(GWR) Shut Down After
| 38| 2| Enable Press 3x Lock to remote start with the OEM remote
| Program bypass option:| UNIT OPTION| DESCRIPTION|
| | C1| OEM Remote status (Lock/Unlock) monitoring
| | D6| Push-to-Start
Push-to-Start
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:| A11 | Hood trigger
(Output Status). Contact de capot (état de sortie).
MANDATORY INSTALL
*HOOD NON PIN
HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF
SECURITY STICKER
Included
Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICL
This guide may change without notice. See www.fortin.ca for latest version.
DESCRIPTION
AUTOMATIC TRANSMISSION WIRING CONNECTION
KEY BYPASS PROGRAMMING PROCEDURE 1/2
insert the key in to the key port
| Press and hold
the programming button: Connect the 6-PIN Main harness (White
connector).
⮑ The Blue , Red , Yellow and Blue & Red LEDs will alternatively illuminate .
---|---
| Release the
programmingbutton when the LED is YELLOW.
| If the LED is not solid YELLOW disconnect the 6-Pin connector
(Ma i n-Harness) and go back to step
| Insert the
required remaining connectors
| Press and
release the programming button two (2x) times.
_ ⮑ The YELLOW LED will _flash 2 times each second.
4WAIT for the YELLOW LED to tum ON solide
| Press and
release the Push-to-Start button once (x1 ).
⮑ The RED LED will turns ON.
| the YELLOW and RED
LED’s arenot solid, press and release the PTS button twice to turn OFF
the engine and then press and release the PTS button once again to
turn the Accessory ON.
Repeat this step until the YELLOW and RED LED’s are solid.
| Press and
release the Push-to-Start button once (x1 ).
_ ⮑ The BLUE LED to flash _rapidly.
| Press and release the Push-to Start button once to shut off the
ignition.
| Press and
release the Push-to Start button twice to turn ON the ignition.
| ⮑ +The BLUE, YELLOW and RED LED’s will rapidly alternate.
| The YELLOW LED begins to flash rapidly: Key bypass programmed.
| Press and release the Push-to Start button once to shut off the
ignition.
| The module is now programmed
Use the remote of the remote starter or securely system to test all the
supported features to ensure proper programming
REMOTE STARTER PROGRAMMING PROCEDURE
REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.
REMOTE STARTER FUNCTIONALITY
All doors must be closed.
Remote start the vehicle.
Unlock the doors with either:
- The OEM remote
- The remote-starter remote
- Or the proximity remote
Enter the vehicle with the Intelligent Key.
The vehicle can now be put into gear and driven.
If the vehicle is not unlocked with one of these conditions the remote-starter will shut down as soon as any door is opened.
Module label
Notice: Updated Firmware and Installation Guides Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit
before connecting to it. Only a computer safe logic probe or digital
multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no
liability or responsibility whatsoever pertaining to the accuracy or currency
of the information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualifi ed technician. The information supplied is a
guide only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH
SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE
Documents / Resources
|
FORTIN Infiniti QX50 2016 Push to Start Remote Starters and Alarm
Systems
[pdf] Installation Guide
Infiniti QX50 2016 Push to Start Remote Starters and Alarm Systems, Infiniti
QX50, 2016 Push to Start Remote Starters and Alarm Systems, Remote Starters
and Alarm Systems, Starters and Alarm Systems
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>