FORTIN 2023 Cadillac CT5 Push Button Remote Starters and Alarm Systems Installation Guide

June 13, 2024
FORTIN

FORTIN 2023 Cadillac CT5 Push Button Remote Starters and Alarm Systems Installation Guide
FORTIN 2023 Cadillac CT5 Push Button Remote Starters and Alarm
Systems

REGULAR INSTALLATION

Overview

Vehicle functions supported in this diagram (functional if equipped)

Key Control| •
Lock| •
Unlock| •
Disarm| •
Parking Light| •
Trunk (open)| •
RAP Disable| •
Tachometer| •
Door Status| •
Trunk Status| •
Hand-Brake Status| •
Foot-Brake Status| •
OEM Remote Monitoring| •

COMPATIBLE: QR CODE ON THE LABEL
MODULE: MANUFACTURED AFTER: 2019
REQUIRED:
Instruction

Program bypass option:

IF THE VEHICLE IS NOT EQUIPPED

WITH FUNCTIONAL HOOD PIN:
D’UN CONTACT DE CAPO CONNECTION:

UNIT OPTION OPTION UNITE DESCRIPTION
C1 OEM Remote status (Lock/Unlock) monitoring

Suivi des status (Verrouillage/Déverrouil- lage) de la télécommande d’origine
D6| Push-to-Start
Push-to-Start
A11| OFF NON| Hood trigger (Output Status).
Contact de capot (état de sortie).

Parts required (Not included)

  • 1x Vehicle Key
  • 1x ARE-1R0
  • 1x 1 Amp. Diode
  • 1x 1.5 K Ohm resistor
  • 1x 7.5 Amp. Fuse

NOTES

  1 KEY REQUIRED FOR THE INSTALLATION

MANDATORY INSTALL

**

  • HOOD PIN HOOD STATUS :** THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

Remove the battery from the key fob.
Parts required

This installation is easier with a transponder antenna (Part #: ARE-1R0, Sold separately).
Assembly

Make 5 to 10 loops with a 22 gauge wire on the back of the key fob.
Assembly

DESCRIPTION

Assembly Instruction

WIRING CONNECTION

Wiring Connection

PROGRAMMING PROCEDURE

Press and hold the programming button: Connect the 4-Pin Data-link connector.
The BLUE, RED, YELLOW and BLUE & RED LEDs will alternatively illuminate.
Programming Proofedre

Release the programming button when the LED is
Programming Proofedre

If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.

Insert the required remaining connectors.
Programming Proofedre

Press and hold the Push-to-Start button until the ignition turn ON.
Programming Proofedre

Press and release the programming button once (1x).
Programming Proofedre

Press the Push-to-Start button once to turn off the ignition.

The BLUE LED will turn off.
Programming Proofedre

The module is now programmed.

FUNCTIONS

All doors must be closed.

Remote start the vehicle.

Unlock the doors with either:

  • the remote-starter remote
  • the proxy remote.

Enter the vehicle with the SMART-KEY.

Press the brake pedal.

The vehicle can now be put in to gear and driven.

The engine will shutdown when a door is open if the vehicle is not Unlock.

Module label
Module label

Notice: Updated Firmware and Installation Guides.
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

www.fortinbypass.com
WEB UPDATE

FORTIN Logo

Documents / Resources

| FORTIN 2023 Cadillac CT5 Push Button Remote Starters and Alarm Systems [pdf] Installation Guide
EVO-ALL, CT5 2020-2023, 2023, 2023 Cadillac CT5 Push Button Remote Starters and Alarm Systems, Cadillac CT5 Push Button Remote Starters and Alarm Systems, CT5 Push Button Remote Starters and Alarm Systems, Push Button Remote Starters and Alarm Systems, Remote Starters and Alarm Systems, Starters and Alarm Systems, Alarm Systems, Systems
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

FORTIN User Manuals

Related Manuals