FORTIN 88681 Lincoln MKS Push-to-Start Remote Starters and Alarm Systems Installation Guide

June 13, 2024
FORTIN

FORTIN 88681 Lincoln MKS Push-to-Start Remote Starters and Alarm Systems

FORTIN-88681-Lincoln-MKS-Push-to-Start-Remote-Starters-and-Alarm-Systems-
product

REGULAR INSTALLATION

| Vehicle functions supported in this diagram (functional if equipped)
---|---

VEHICLE VEHICULES

|

PUS STA

|

H RT

YEARS ANNÉES

|

Immobilizer bypass Contournement d’immobilisateur

| Lock| Unlock| Arm| Disarm| Trunk (Open)| RAP Disable| Tachometer| Door Status| Trunk Status| Hood Status*| Hand-Brake Status| Foot-Brake Status| OEM Remote monitoring
FORD
Taurus| Push-to-Start| 2013-2015| | | | | | | | | | | | | |
LINCOLN
MKS| Push-to-Start| 2013-2016| | | | | | | | | | | | | |

* HOOD PIN
HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

WIRING CONNECTION

FORTIN-88681-Lincoln-MKS-Push-to-Start-Remote-Starters-and-Alarm-Systems-
\(5\) FORTIN-88681
-Lincoln-MKS-Push-to-Start-Remote-Starters-and-Alarm-Systems-
\(6\)

KEY BYPASSPROGRAMMING PROCEDURE 1/2

Remove the battery from the OEM remote. Keep the other OEM remotes at least 3 meters (10 feet) away from the vehicle to proceed.

  1. Press and hold the programming button: Connect the 4-PIN Data-link harness (Black connector).
    The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.

  2. Release the programming button when the LED is YELLOW. If the LED is not solid YELLOW disconnect the 4-Pin connector (Data-Link) and go back to step 1.

  3. Insert the required remaining connectors.

  4. Press and release the programming button three times (3x).

  5. The YELLOW LED will alternate between 3x flashes and a pause.

  6. Wait until the YELLOW LED turns ON.

  7. Insert the OEM remote (no battery) in the keyport. (Keyport located in center console or in Steering Column).

  8. Press and release the footbrake pedal.

  9. The RED LED will turns ON.

  10. The YELLOW LED turns OFF.
    If the LED is not solid RED, press and release the footbrake, wait 5 seconds, repeate this step until the RED LED turn ON.

  11. Press and release the footbrake pedal.

  12. The RED LED is ON.

  13. The BLUE LED turns ON.
    If the LED is not solid BLUE, press and release the footbrake, wait 5 seconds, repeate this step until the BLUE LED turn ON.

  14. Press the START/STOP button twice to turn ON the ignition.

  15. The BLUE LED will Flash rapidly.

  16. The RED LED will turns OFF.

  17. Press the START/STOP button once to turn OFF the ignition.

  18. Wait until the BLUE LED flash slowly.

  19. Disconnect all the connectors and after the Data-Link (4-pins) connector.

REMOTE STARTER FUNCTIONALITY

FORTIN-88681-Lincoln-MKS-Push-to-Start-Remote-Starters-and-Alarm-Systems-
\(17\)

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN

ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

FORTIN User Manuals

Related Manuals