FORTIN 59251 2009 GMC Savana Regular Key Remote Starters and Alarm Systems Installation Guide

FORTIN 59251 2009 GMC Savana Regular Key Remote Starters and Alarm

Systems

Product Information

• Product   Name: Remote Starter Module
• Brand: Chevrolet
• Model: Express Van
• Year Range: 2008-2023

Bypass Firmware Version:

• Firmware Version: 70.[41]
• Minimum Bypass Firmware Version: 70.[41]

Compatible Vehicles:

• Chevrolet Express Van (2008-2023)
• Chevrolet Express 2500 (2008-2016)
• Chevrolet Express 3500 (2008-2016)
• GMC Savana (2008-2023)

Installation Requirements:
The bypass firmware version and options can be added using the FLASH LINK UPDATER or FLASH LINK MOBILE tool, which are sold separately.

Product Usage Instructions

1. Ensure that the bypass firmware version and options are added using the FLASH LINK UPDATER or FLASH LINK MOBILE tool.
2. Follow the wiring connections as specified in the wiring diagram provided in the user manual.
3. Make sure to install the hood pin switch if the vehicle can be remote started with the hood open. Set function A11 to OFF if the hood pin switch is not installed.
4. Connect the ignition barrel, ignition connector, and transponder connector according to the wiring connections mentioned in the user manual.
5. Cut the loop for automatic transmission mode, if applicable.
6. Ensure all wiring connections are secure and properly insulated.
7. Test the remote starter functionality using the OEM remote. Press the lock button 3 times to remote start the vehicle.
8. Refer to the user manual for additional troubleshooting tips and information.

REGULAR INSTALLATION

| Vehicle functions supported in this diagram (functional if equipped) | Fonctions du véhicule supportées dans ce diagramme (fonctionnelles si équipé)
---|---

VEHICLE **** YEARS

VEHICULES **** ANNÉES

|

Immobilizer bypass Contournement d’immobilisateur

|

T-Harness availble (sold separatly)

T-Harnais disponible (vendu séparement)

| Lock| Unlock| Arm| Disarm| Trunk (open)| Parking Lights| RAP Disable| Tachometer| Heated Seats| Door Status| Trunk Status| Hood Status| Hand-Brake Status| Foot-Brake Status| PK3, Passlock| OEM Remote monitoring| R.S. OEM remote Stand Alone compatible
CHEVROLET
Express Van

Express 2500

| 2008-2023| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •
2008-2016| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •
Express 3500            2008-2016| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •

* HOOD PIN
HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

WIRING CONNECTION

KEY BYPASS PROGRAMMING PROCEDURE 1/2

1. Press and hold the programming button: Connect the 6-PIN Main harness {White connector).
   The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.

2. Release the programming button when the LED is BLUE. If the LED is not solid BLUE disconnect the 6-Pin connector (Main-Harness) and go back to step 1.

3. Insert the required remaining connectors.

4. Turn the key to the Ignition ON/RUN position.
   The BLUE LED will flash rapidly.

5. Press and release the programming button once {1x).
   The Blue LED will tum OFF. L+The YELLOW and RED LEDS will alternate ..

6. Turn the key to the OFF position.

7. Disconnect all connectors and after the 6-Pin (Main-Harness) or the 4-Pin Data-link connector.

KEY BYPASS PROGRAMMING PROCEDURE 2/2

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THEMODULE FOR THE REMOTE STARTER PROGRAMMING

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN

ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>