FORTIN 66511 Nissan Maxima 2020 Push to Start Remote Starters and Alarm Systems Installation Guide

FORTIN 66511 Nissan Maxima 2020 Push to Start Remote Starters and Alarm

Systems

Product Information

• Product Name: Transponder Bypass
• Model: Nissan Altima, Murano, Maxima
• Firmware Version: 72.[48]
• Compatible with Push-to-Start vehicles

Product Usage Instructions

1. Before starting the installation process, ensure that you have the necessary parts which are not included in the package:
   • 1x 7.5 Amp Fuse
   • 2x 1 Amp Diode
   • 1x 20 Amp Fuse (for manual transmission)
2. The installation of safety elements is mandatory. The hood pin switch must be installed for proper functioning.
3. If the vehicle can be remote started with the hood open, set function A11 to OFF.
4. The module must be installed by a qualified technician to avoid permanent damage to the vehicle.
5. Follow the provided wiring connection guide for proper installation:
   • Connect BCM Grey 24-Pin connector
   • Connect BCM White 15-Pin connector
   • Connect BCM Green 40-Pin connector
   • Connect BCM Black 40-Pin connector
   • Connect BCM Black 24-Pin connector
   • Connect A15 (-) HOOD to IN RS19
   • Connect A14 (-) HAND BRAKE to IN RS9
   • Connect RS7 OUT to STARTER (+)
   • Connect A9 STARTER to IN RS12
   • Connect A12 (+/-) TACHOMETER to IN RS13
   • Connect A11 (+) FOOT BRAKE to OUT RS14
   • Connect IGNITION (+) to A3 (-) UNLOCK and A2 (-) LOCK (with Data-Link)
   • Connect RS2 IN to 12V BATTERY (+)
   • Connect RS1 Ground (-)
   • Connect (+)Ignion1 to Yellow
   • Connect (-) Lock to Purple
   • Connect (-) Unlock to Purple/White
   • Connect (-) Ignion3 to Green
   • Connect (-) Starter to White
   • Connect Orange/Black (-) Ground While Running
   • Connect Red/Blue (+) Start
   • Connect Lt.Blue/Black (-) Driver Door Pin
   • Connect Black (+) Foot Brake
   • Connect Pink (-/+) Tachometer
   • Connect Yellow/Black to Data-Link (if required)

Please note that this is a general overview of the product information and usage instructions. For detailed installation and programming steps, refer to the official user manual provided with the product or consult a qualified technician.

REGULAR INSTALLATION

Vehicle                           Modele Years

Véhicule(s)                     Modèle(s) Année(s)

| Transponder Bypass| Lock| | Unlock| Arm| Disarm| RAP Disable| Hazard lights| Tachometer| Autolight Off| Door Status| Trunk Status| Hood Status*| Hand-Brake Status| Foot-Brake Status| OEM Remote Monitoring| Push-to-Start Control
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
Nissan| | | | | | | | | | | | | | | | | | |
Altima| Push-to-Start| 2013-2018| •| •| | •| •| •| •| •| •| •| •| •| •| •| •| •| •
| Murano                         Push-to-Start          2015-2023       • •      •      •      •      •      •      •      •      •      •      •      • •                       •                  •
Maxima| Push-to-Start| 2016-2022| •| •| | •| •| •| •| •| •| •| •| •| •| •| •| •| •

* HOOD PIN
HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

Parts required (Not included) :

• 1x 7.5 Amp. Fuse Fusible 7.5 Amp.
• 2x 1 Amp. Diode Diode 1 Amp.
• 1x 20 Amp. Fuse (manual transmission)

NOTES:
THIS MODULE MUST BE INSTALLED BE A QUALIFED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

WIRING CONNECTION

MANUAL TRANSMISSION

DCRYPTOR PROGRAMMING PROCEDURE

1. Press and hold the programming button: Connect the 4-PIN Data-link harness (Black connector).

2. The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.

3. Release the programming button when the Blue LED is ON.

4. If the LED are not solid BLUE disconnect the 4-PIN Data-link harness (Black connector) and go back to step1.

5. Connect the required remaining harnesses

6. Do not press the brake pedal. Press the Push-to-Start button twice to turn ON the ignition.

7. The BLUE LED will flash rapidly.

8. Press the Push-to-Start button once to turn off the ignition.

9.  The BLUE LED  will turn off.

10. The RED and YELLOW LEDs will alternated.

11. Disconnect all the connectors and after the Data-Link (4-pins) connector.

REMOTE STARTER FUNCTIONALITY

• All doors must be closed.
• Remote start the vehicle.
• Unlock the doors with either:
  • The OEM remote
  • The remote-starter remote
  • Or the proximity remote
• Enter the vehicle with the Intelligent Key.
• DO NOT PRESS THE BRAKE PEDAL.
• Press the brake pedal. The vehicle can now be put in to gear and driven. If the Smart-Key is not detected the vehicle will shut down.

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN

ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>