FORTIN 2009-2014 PTS A 2013 Nissan Maxima Push Button Remote Starters and Alarm Systems Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
REGULAR INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION
BYPASS FIRMWARE VERSION
72.[48] NISSAN MINIMUM
To add the firmware version and the options, use the
FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
Program bypass option:
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:
UNIT OPTION
OPTION UNITE| DESCRIPTION
---|---
C1| OEM Remote status (Lock/Unlock)
monitoring
D6| Push-to-Start
A11| Hood trigger (Output Status).
Program remote starter option:
| FUNCTION | MODE | DESCRIPTION |
|---|---|---|
| 8 | 2 | Double 0.25 sec unlock pulse |
| 31 | 4 | (+) Parking Light (E1) |
| 32 | 3 | DK.Blue (GWR) Shut Down After |
MANDATORY INSTALL
*HOOD PIN
HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED)
MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET
FUNCTION A11 TO OFF.
A11
SECURITY STICKER
WARNING
Included
Notice: the installation of safety elements are mandatory. The hood pin
and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION
CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
DESCRIPTION
WIRING CONNECTION
KEY BYPASS PROGRAMMING PROCEDURE 1/2
Insert the key in the key port.
KEY BYPASS PROGRAMMING PROCEDURE 2/2
The module is now programmed.
Use the remote of the remote starter or security system to test all of the
supported features to ensure proper programming.
REMOTE STARTER PROGRAMMING PROCEDURE
REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE
STARTER PROGRAMMING.
REMOTE STARTER FUNCTIONALITY
All doors must be closed.| Remote start the vehicle.| Unlock the doors with the remote-starter remote or the OEM remote.
Insert and Turn the key to the Ignition ON/RUN position.| Press the brake pedal.| The vehicle can now be put in to gear and driven.
Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest firmware
and download the latest installation guide(s) prior to the installation of
this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit
before connecting to it. Only a computer safe logic probe or digital
multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no
liability or responsibility whatsoever pertaining to the accuracy or currency
of the information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualifi ed technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-779
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE
Documents / Resources
|
FORTIN 2009-2014 PTS A 2013 Nissan Maxima Push Button Remote Starters and
Alarm
Systems
[pdf] Installation Guide
2009-2014 PTS A 2013 Nissan Maxima Push Button Remote Starters and Alarm
Systems, 2009-2014 PTS A, 2013 Nissan Maxima Push Button Remote Starters and
Alarm Systems, Maxima Push Button Remote Starters and Alarm Systems, Button
Remote Starters and Alarm Systems, Remote Starters and Alarm Systems, Starters
and Alarm Systems, Alarm Systems
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>