FORTIN 97291 Ford Fusion 2014 Standard-Key Remote Starters and Alarm Systems Installation Guide
- June 13, 2024
- FORTIN
Table of Contents
REV.: 20230426
Guide # 97291
REGULAR & THAR-FOR2 INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION
97291 Ford Fusion 2014 Standard-Key Remote Starters and Alarm Systems
BYPASS FIRMWARE VERSION VERSION LOGICIELLE CONTOURNEMENT
71.[52] FORD MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
Program remote starter option for R.S OEM REMOTE STAND ALONE| 38| 2| Enable
Press 3x Lock to remote start with the OEM remote.
---|---|---|---
Program remote
starter option for Diesel vehicules:| 18| 3| Enable (10 seconds) delay between
Ignition power up and Starter (crank)
| | UNIT OPTION
OPTION UNITE| DESCRIPTION
---|---|---|---
| Program bypass option:| C1| OEM Remote status (Lock/Unlock)
monitoring
| IF THE VEHICLE IS NOT EQUIPPED
WITH FUNCTIONAL HOOD PIN:| A11| Hood trigger (Output Status).
| Program bypass option
(Vehicle hybrid only):| D4| Hybrid mode (Vehicle hybrid only)
MANDATORY INSTALL
*HOOD PIN
HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED)
MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET
FUNCTION A11 TO OFF.
A11
SECURITY STICKER
WARNING
Included
Notice: the installation of safety elements are mandatory. The hood pin
and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION
CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
DESCRIPTION
Parts required (Not included)
WIRE TO WIRE DIAGRAM
| 2x | Vehicle key for programming |
|---|---|
| 2x | Diode 1Amp |
| 1x | Relay (key Bypass) |
| 1x | Relay (Parking lights) |
THARNESS DIAGRAM
THARNESS THAR-FOR2
| 1x | THAR-FOR2 |
|---|---|
| 2x | Vehicle key for programming |
| 1x | Relay (Parking lights) |
WIRING CONNECTION
DCRYPTOR PROGRAMMING PROCEDURE
BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.
|
Press and hold the programming button:
Insert the 6-Pin Main connector
Press and hold the programming button:
Connect the 4-PIN Data-link harness (Black connector).
The LEDs will alternate between BLUE, RED, YELLOW & BLUE/RED flashes.
---|---
Release the programming button when the LED’s are RED and BLUE.
If the LEDs are not solid BLUE and RED disconnect the 6- Pin connector
(MainHarness) and go back to step 1.
If the BLUE and RED LED are not ON solid disconnect the 4-PIN Data-link
harness (Black connector) and go back to step 1.
Insert the required remaining connectors.
Press0 and release the programming button eight (8x) times.
The RED and BLUE LED’s will alternate between 7 flashes and a pause.
Wait,
The RED and BLUE LED’s will turn ON solid.
WITH FLIP KEY
Flip the key blade inside the key.
Place the key #1 in front of the ignition barrel.
WITHOUT FLIP KEY
Place the back of the key #1 in front of the ignition barrel.
KEY BYPASS PROGRAMMING PROCEDURE 2/4
WITH FLIP KEY
Remove the key #1.
WITHOUT FLIP KEY
Remove the key #1.
Place the key #2 in front of the ignition barrel.
Place the back of the key #2 in front of the ignition barrel.
KEY BYPASS PROGRAMMING PROCEDURE 3/4
Wait,
Disconnect all connectors and after the 6-Pin (Main-Harness) or the 4-Pin Data-link connector.
Microsoft Windows Computer with Internet connection*
Smartphone (Internet provider charges may apply)
Use the tool:
FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
Parts required (not included)
AFTER DCRYPTOR PROGRAMMING COMPLETED
Go back to the vehicle and reconnect the 6-Pin (MainHarness) or the 4-pins
(Data-Link) connector and after all the remaining connector.
KEY BYPASS PROGRAMMING PROCEDURE 4/4
Turn the key to the OFF position.
The YELLOW will turn OFF.
The module is now programmed.
REMOTE STARTER
Test the remote starter. Remote start the vehicle.
REMOTE STARTER PROGRAMMING PROCEDURE
REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE
STARTER PROGRAMMING.
REMOTE STARTER FUNCTIONALITY
All doors must be closed.| Remote start the vehicle.| Unlock the doors with the remote-starter remote or the OEM remote.
Insert and Turn the key to the Ignition ON/RUN position.| Press the brake pedal.| The vehicle can now be put in to gear and driven.
Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest firmware
and download the latest installation guide(s) prior to the installation of
this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit
before connecting to it. Only a computer safe logic probe or digital
multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no
liability or responsibility whatsoever pertaining to the accuracy or currency
of the information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualifi ed technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-779
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE
Documents / Resources
|
FORTIN 97291 Ford Fusion 2014 Standard-Key Remote Starters and Alarm
Systems
[pdf] Installation Guide
97291 Ford Fusion 2014 Standard-Key Remote Starters and Alarm Systems, 97291,
Ford Fusion 2014 Standard-Key Remote Starters and Alarm Systems, Standard-Key
Remote Starters and Alarm Systems, Key Remote Starters and Alarm Systems,
Remote Starters and Alarm Systems, Starters and Alarm Systems, Alarm Systems
---|---