FORTIN Audi S4 2018 Push to Start Remote Starters and Alarm Systems Installation Guide

REGULAR INSTALLATION 
ADDENDUM – SUGGESTED WIRING CONFIGURATION

Audi S4 2018 Push to Start Remote Starters and Alarm Systems

COMPATIBLE
MODULE
REQUIRED:| QR CODE
ON THE LABEL
MANUFACTURED
AFTER: 2019
---|---

FIRMWARE VERSION
61.[25] MINIMUM

To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool,
sold separately.

Parts required (Not included)

1x Vehicle Key
4x 1 AMP Diode
1x 10Amp Fuse

NOTES
1 KEY REQUIRED FOR THE INSTALLATION

Program bypass option

IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:

UNIT OPTION OPTION UNITE

MANDATORY INSTALL

• HOOD PIN
  HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

Program bypass option:
Program bypass option
OPTION COMFORT GROUP:

monitoring
D6| Push-to-Start
A5| AUTOMATIC TURN ON : option confort
group
E8| By default : Feature 5 : Trunk button
on OEM Remote need to be hold 2
second to open trunk

Rear BCM, left side of trunk.

KEY CONTROL

Remove the battery from the key fob.

This installation is easier with a transponder antenna rings
(Part #: AR35, Sold separately).

Remove the adhesive from the back of the antenna ring and stick it on the back of the key fob.
Remove the adhesive from the back of the antenna ring and stick it on front of the key detector located inside the cover of the center console.
Make 5 to 10 loops with a 22 gauge wire on the back of the key fob.

WIRING CONNECTION

PROGRAMMING PROCEDURE

Press and hold the Connect programming button: the 4-PIN Data-link harness (Black connector).
The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.

Release the programming button when the LED is BLUE.

Insert the required remaining connectors.

Do not press the brake pedal. the Push-to-Start button once to turn on the ignition.
The BLUE LED will flash rapidly.

Press the Push-to-Start button once to turn off the ignition.
The BLUE LED will turn off.
The module is now programmed.

REMOTE STARTER FUNCTIONALITY

All doors must be closed.| Remote start the vehicle.| Unlock the doors with either:
• The OEM remote
• The remote-starter remote or
• The door handle| Enter the vehicle
with the Intelligent SmartKey.| The vehicle can now be put in to
gear and driven.

Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no  liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind  indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction  guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>