FORTIN 2007-2013 2013 Chevrolet Silverado 1500 Standard-Key Remote Starters and Alarm Systems Installation Guide

REV.: 20230504
Guide # 107501
REGULAR INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION

VEHICLE
YEARS

2007-2013 2013 Chevrolet Silverado 1500 Standard-Key Remote Starters and

Alarm Systems

BYPASS FIRMWARE VERSION
VERSION LOGICIELLE CONTOURNEMENT
70.[41] GM MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
Program bypass option:

UNIT OPTION
OPTION UNITE| DESCRIPTION
---|---
C1| OEM Remote status (Lock/Unlock) monitoring
A11| Hood trigger (Output Status).

Program remote starter option for R.S. OEM REMOTE STAND ALONE:

Press 3x Lock to remote start with the OEM remote.

MANDATORY INSTALL

 *  HOOD PIN

HOOD STATUS : THE HOOD PIN SWITCH (NCLUDED) 544
MUST BE INSTALLED IF THE VEHICLE CAN BE
REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION AT1 T0 OFF.

A11|
---|---

SECURITY STICKER

Notice: the instalation of safety
CONNECTION CAN CAUSE PERVANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

WIRING CONNECTION

KEY BYPASS PROGRAMMING PROCEDURE 1/2

1. Press and hold the programming button:
   Connect the 6-PIN Main harness (White connector). “+The Blue, Red, Yellow and Blue & Red LEDs will altenatively illuminate.

2. Release the programming button when the LED is BLUE Ifthe LED is not solid BLUE disconnect the 6-Pin connector (Main-Harness) and go back to step 1.

3. Insert the required remaining connectors.

4. Turn the key to the Ignition ON/RUN position ↳The BLUE LED will flash rapidy

5. Press and release the programming button once (1x).
   ↳ The Blue LED will turn OFF.
   ↳ The YELLOW and RED LEDS will alternate.

6. Turn the key to the OFF position.

7. Disconnect all connectors and after the 6-Pin (Main-Hamess) or the 4-Pin Data-link connector.
   KEY BYPASS PROGRAMMING PROCEDURE 2/2

8. Microsaft Windows Computer with Miemhet comection®

OR

Use the tool:
FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
*Parts required (not included) 9. AFTER DCRYPTOR PROGRAMMING COMPLETED
Go back to the vehicle and reconnect the 6-Pin (MainHamess) or the 4-pins (Data-Link) connector and after all the remaining connector.

The module is now programmed.
REMOTE STARTER / ALARM VERIEICATION
Test the remote starter. Remote start the vehicle.

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE
MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

| | | | |
---|---|---|---|---|---
Al doors must
be closed.| Remote start the
vehicle.| Unlock the doors with the remote-starter remote or the OEM remote.| It Tn the key to the Janition ONRUN
position.| Press the brake
pedal. e brate pec| The vehicle can
now be putin to
gear and driven.

www.fortinbypass.com

Module label

Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

‘WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Tel: 514-255-HELP (4357) 1-877-336-7797
www.fortinbypass.com
WEB UPDATE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>