FORTIN THAR-GM7 EVO ONE User Manual

June 13, 2024
FORTIN

REV.: 20230530
**Guide # 91281
THAR-GM7 THARNESS INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION

**

THAR-GM7 EVO ONE

Vehicle functions supported in this diagram (functional if equipped)

VEHICLE| YEARS|

Immobilizer bypass Contournement d’immobilisateur

| Lock| Unlock| Arm| Disarm| Trunk (open)| RAP Disable| Tachometer| Door Status| Trunk Status| Hood Status*| Hand-Brake Status| Foot-Brake Status| PK3, Passlock| OEM remote Monitoring| R.S. OEM remote Stand Alone com- patible
CHEVROLET|  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
Silverado 1500| 2014-2018|
| | | | | | | | | | | | | | |
Silverado 1500 Limited| 2019|
| | | | | | | | | | | | | | |
Silverado 2500-3500| 2015-2020|
| | | | | | | | | | | | | | |
Suburban| 2015-2019|
| | | | | | | | | | | | | | |
Tahoe| 2015-2019|
| | | | | | | | | | | | | | |
GM|  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
Sierra 1500| 2014-2018|
| | | | | | | | | | | | | | |
Sierra 1500 Limited| 2019|
| | | | | | | | | | | | | | |
Sierra 2500-3500| 2015-2020|
| | | | | | | | | | | | | | |
Yukon| 2015-2019|
| | | | | | | | | | | | | | |
BYPASS FIRMWARE VERSION VERSION LOGICIELLE CONTOURNEMENT| To add the firmware version and the options, use the  FLASH LINK UPDATER or FLASH LINK MOBILE** tool, sold separately.
---|---

70.

| [ 45 ]
| MINIMUM
| Program bypass option:| UNIT OPTION OPTION UNITE| DESCRIPTION
---|---|---|---
C1| OEM Remote status (Lock/Unlock) monitoring
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:| A11| OFF NON| Hood trigger (Output Status).
 | Program bypass option ( If equiped with OEM alarm ):| D2| Unlock before / Lock after (Disarm OEM alarm)

ATTENTION!

| DATE: XX-XX

Starter : X EVO-ONE : X
Date: xx-xx
EVO-ONE
REMOTE STARTER & ALARM & BYPASS MODULE     Service No : X     Made in Canada www.fortinbypass.com

|

E5

| OFF NON| By default DEACTIVATED

ON OUI

| MANUFACTURED MODULES BETWEEN: 04/2018 TO 04/2019 MODULES

| Program remote starter option for R.S. OEM REMOTE STAND ALONE :| FUNCTION FONCTION| MODE| DESCRIPTION
38| 2| Enable : Press 3x Lock to remote start with the OEM remote.

MANDATORY INSTALL

HOOD
PIN

CONTACT
DE CAPOT

| HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED)
MUST BE INSTALLED IF THE VEHICLE CAN BE
REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
---|---

SECURITY STICKER
Notice:
the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

FORTIN THAR-GM7 EVO ONE - fig

AUTOMATIC TRANSMISSION WIRING CONNECTION

FORTIN THAR-GM7 EVO ONE - fig 1

DCRYPTOR PROGRAMMING PROCEDURE

FORTIN THAR-GM7 EVO ONE - fig 3FORTIN THAR-GM7
EVO ONE - fig 5

KEY BYPASS PROGRAMMING PROCEDURE

FORTIN THAR-GM7 EVO ONE - fig 8

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

FORTIN THAR-GM7 EVO ONE - fig 10

Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

FORTIN User Manuals

Related Manuals